TranSystems Corporation - LGM Construction

501070099 Federal Express Oakland Sort Expansion Issued for Bid 10/11
PART 2 - PRODUCTS
2.1 PIPE
A. Materials for Soil and Waste piping shall be as follows. Products shall be as specified in Section
15050, BASIC MATERIALS AND METHODS.
2.2 INSULATION
2.3 VALVES
Pipe
Pipe Use Spec. No.
Sanitary Waste - above ground No. 4
(1-1/2" and smaller)
Sanitary Waste - above ground No. 3
(2" and larger)
Sanitary Waste - underground No. 3 or No. 7
(all sizes)
Exposed Sanitary Waste Vent No. 5
above ground (all sizes)
Concealed Sanitary Waste Vent - No. 4, or No. 5
above ground (1-1/2" and smaller)
Concealed Sanitary Waste Vent - No. 3 or No. 5
above ground (2" and larger)
Sanitary Waste Vent - under- No. 3 or No. 7
ground (2" and larger)
A. Soil and waste piping shall not be insulated.
A. Valves shall not be installed on soil and waste piping.
2.4 FLOOR DRAINS
A. Type 1
Description: Coated cast iron with double drainage flange, non-puncturing flashing clamp collar,
weepholes, bottom outlet, inside caulk connection, round top, and removable deep sediment
bucket with integral drainage rim so designed that grate cannot be set in place unless bucket is in
position.
Grate: Heavy duty ductile iron grate suitable for fork truck traffic.
Trap: Deep seal “P” trap.
SOIL AND WASTE SYSTEM 15405-2