GeniusPro/Lightpalette Operator's Manual - Strand Lighting

Networker Software
Other fixed startup modes are:
main: backup_mode = 2
backup: backup_mode = 1
Using Remote Console Submasters
When a remote console logs in, its submaster faders control the same submasters as the faders on the
main console. For a fader to take control of a submaster, it must be moved to match the position of the
fader on the other console which currently controls the submaster.
The faders on a remote console can also be used to control submasters 31-54 on a 530 main console,
or 25-54 on a 520 main console. To do this, add the line
set 220numsubs=54
in the file USERINIT.BAT on the 530 or 520, and set the submaster layout setup field to “25-36 & 37-
48” on the remote console.
Remote Console Status
The node name of each console, together with the name of the main console which the remote is
logged into, is displayed on most screens below the wheel bar.
Remote Console Controls
Control interaction between main and remote is summarized below:-
Control Mode
Command Line separate
Channel Controls separate
Screens separate
Macro Execution separate
Cue Playbacks shared
Fx Playbacks shared
Submasters
shared (unless submaster layout
setup is changed)
Grandmasters shared
file:///C|/LIGHTP/HELP.ENG/page15.htm (21 of 23)11/2/2004 3:02:29 AM