GeniusPro/Lightpalette Operator's Manual - Strand Lighting

Effects
[FX] [1] [FX DIR] {REV} [* ]
Sets FX 1 direction to reverse
[FX] [1] [FX DIR] {BOUNCE} [* ]
Sets FX 1 direction to bounce
[FX] [1] [FX DIR] {RANDOM} [* ]
Sets FX 1 direction to random
Forward
The effect steps are played sequentially from the lowest step number to the highest step number and
are then repeated from the first step number.
Reverse
The effect steps are played sequentially from the highest step number to the lowest step number and
are then repeated from the highest step number.
Bounce
The effect steps are played sequentially from the lowest step number to the highest step number, and
then from the highest step number back to the lowest step number. Steps are then repeated in the
same sequence.
Random
Steps are played randomly. All steps are played once before a new random sequence is started.
Effect Fade Times
You can enter fade values from one hundredth of a second to 59.59 seconds, as shown in the table.
Values of less than one second can be set in hundredths of a second.
Key Entry Shown as Value
0.01 0.01 One hundredth of a second.
.0.1 0.1 One tenth of a second
1 1 One second
10 10 Ten seconds
100 1:00 One minute
1000 10:00 Ten Minutes
5959 59:59 Fifty nine minutes 59 seconds.
file:///C|/LIGHTP/HELP.ENG/page35.htm (5 of 34)11/2/2004 3:03:13 AM