GeniusPro/Lightpalette Operator's Manual - Strand Lighting

Cues and X Playbacks (Direct Entry Mode)
Key Sequence
[6] {A-MOD FROM} [6] [+] [3] [*]
Action
Sets the intensity of channel 6 up 30% in
all cues, subs, groups and effects. Note:
For Direct 2 Digit mode, 30% must be
entered as 80.
Activating/De-activating AutoMod
{AUTOMOD ON}
Key Sequence
{AUTOMOD OFF}
Action
Activates the AutoMod settings. 'Using
Automod' warning is displayed in Status
Window
If AutoMod is activated, pressing this
key will return control to the normal
pairing and remove the 'Using
AutoMod' warning.
Customising the Auto-Mod Screen
Key Sequence
{SOURCE ORDER}
{DEST ORDER}
Action
Displays the paired channels in source
order
Displays the paired channels in
destination order
Note: where more than one destination channel is paired to a source channel and the display
is in destination order, duplicate destination channels are shown in black. Similarly, if more
than one sorce channel is paired to a destination channel and the display is in source order,
the duplicate source channels are shown in black.
Deleting Auto-Mod Channels
Key Sequence
Action
file:///C|/LIGHTP/HELP.ENG/page61.htm (9 of 10)11/2/2004 3:03:32 AM