GeniusPro/Lightpalette Operator's Manual - Strand Lighting

Effects
[FX] [1] {LEVEL} [NORMAL] [*]
Sets FX 1 intensity type for all steps to Normal
[FX] [1] {LEVEL} [NEGATIVE] [*]
Sets FX 1 intensity type for all steps to Negative
[FX] [1] {LEVEL} [NORM/NEG] [*]
Sets FX 1 intensity type for all steps to Normal/Negative
[FX] [1] {LEVEL} [NEG/NORM] [*]
Sets FX 1 intensity type for all steps to Negative/Normal
[FX] [1] {LEVEL} [RANDOM] [*]
Sets FX 1 intensity type for all steps to Random
Next Fx
You can have a new effect automatically start at the end of any effects for which the Stop After
property is set to Time or Cycles. The Next Fx property determines whether a new effect is started,
and what the new effect number is. This property can only be changed from the Effects display, and is
initially set to OFF. You can set the Next Fx to be any other effect number or OFF.
This field can be set using the in edit mode using the trackballball to select the field and the level wheel
or [+] or [-] keys to select the option. Alternatively, the field can be set using the command line as
shown in the following example:
[FX] [1]{NEXT FX} [2] [*]
Sets FX 1 follow-on FX to Fx 2
Assigning Fade Profiles to Effects
The Profile property lets you assign a profile to the fade up and fade down times. The profile applies to
both the fade up and the fade down. To learn how to create a profile, refer to Profiles
file:///C|/LIGHTP/HELP.ENG/page35.htm (8 of 34)11/2/2004 3:03:13 AM