GeniusPro/Lightpalette Operator's Manual - Strand Lighting

Channel levels, attributes and Dimmers cl mode QR
The following Command Line syntax examples are normally used with Lightpalette
Key Sequence Action
[2] [6] [@ATT] [7] [*] AttChan 26 to frame 7
[2] [6] [@ATT] [+] [2] [*] AttChan 26 moved on by 2 frames
[2] [6] [@ATT] [-] [3] [*] AttChan 26 moved back by 3 frames
[2] [6] [@ATT] [SHIFT] [ON] [*] AttChan 26 to maximum frame
[2] [6] ]@ATT] [.] [*] AttChan 26 off at zero
[2] [6] [@ATT] [NEXT] [*] AttChan 26 to next frame
[2] [6] [@ATT] [LAST] [*] AttChan 26 to previous frame
[CUE] [1] [@ATT] [*]
AttChans in cue 1 off at zero
[CUE] [1] [@ATT] [2] [*] AttChans used in cue 1 to frame 2
[CUE] [1] [@ATT] [+] [2] [*]
[CUE] [1] [@] {FULL}
{ATTS ONLY} [*]
AttChans used in cue 1 to recorded
frames plus 2
AttChans from cue 1 at recorded
levels
[1] [@ATT] [2] [Q ONLY/TRACK] [*]
[1] [@ATT] {COL} [2]
[1] [@ATT] {POSIT} [5] [*]
[1] [@ATT] {IRIS} [3] [*]
[1] [@ATT] {FOCUS} [4] [*]
[1] [@ATT] {PRISM} [3] [*]
[1] [@ATT] {GOBO} [6] [*]
[1] [@ATT] {POSITION} [LIVE] [*]
[1] [@ATT] {COL} [LIVE] [*]
AttChan 1 to frame 2, for this cue
only (only valid at cue sheet in track
mode). Q_ONLY/TRACK is valid in
any @ATT command.
Chan 1 to colour attribute as defined
in preset group 2 **
Chan 1 to Pan/Tilt position as defined
in preset group 5 **
Chan 1 to iris as defined in preset
group 3 **
Chan 1 to focus as defined in preset
group 4 **
Chan 1 to prism as defined in preset
group 3 **
Chan 1gobo as defined in preset
group 6 **
In the Group Screen, updates current
group, channel 1 to position in Live
Screen (on stage)
In the Group Screen, updates current
group, channel 1 to the color in Live
Screen (on stage)
file:///C|/LIGHTP/HELP.ENG/page55.htm (5 of 8)11/2/2004 3:03:28 AM