GeniusPro/Lightpalette Operator's Manual - Strand Lighting

Submasters DE Mode QR
Only edited at submasters display
(with the selection bar on a
submaster number).
Key Sequence
Action
[SUB] [1] [*]
Select sub 1 for edit
[SHIFT] bump button
Goes to submaster preview display.
{CLEAR}
Clear selected submaster
[SUB] [1] {CLEAR} Clear submaster 1
[SUB] [1] [THRU] [3] {CLEAR} Clear submasters 1 to 3
[SHIFT] Bump button
Select submaster for editing
Modifying Submasters (Direct Action Mode)
The following Direct Action syntax examples are normally used with GeniusPro and are common to
Direct 1 Digit and Direct 2 Digit command modes
Submaster levels are unchanged.
The submaster number may be
omitted, in which case the current
submaster is used.
Where the TEXT etc. value is
omitted, it is deleted from the
submaster.
Key Sequence Action
[SHIFT] Rollball or Mouse
movement
[*]
Changes fields in Sub Preview
displays from Yellow (non-editable)
to Green (editable), enabling fields to
be selected using the rollball (or
mouse) and the level wheel, [+] or [-]
keys or numeric keypad to set field
values.
Returns fields in the Sub Preview
displays to the non-editable mode
(Yellow)
file:///C|/LIGHTP/HELP.ENG/page67.htm (3 of 8)11/2/2004 3:03:36 AM