GeniusPro/Lightpalette Operator's Manual - Strand Lighting

Networker Software
Remote Printing:
You can specify the NET NODE name of another PC or SN100/102 at the Printer Setup in the Archive
Print display.
Note: Do not send very long printouts to SN nodes, as they have limited file buffer memory. Not all the
printout may print correctly.
Remote Analogue Input:
The Analogue connector on an SN100 or SN102 may be used by setting the NET NODE fields of the
External Submasters Window on the Console Setup Screen. Each external submaster may be set to a
different NET NODE if required. Remember to also assign external submasters and their contents at
the submaster display.
Remote ASCII Input:
This NET NODE can be set to any SN100 or SN102 COM1 or COM2 port. Remote GO key output
(which sends a message whenever GO is pressed) and remote macro trigger output (which sends the
contents of the text string of the text label of any macro which starts with “!”) are similar.
Remote MIDI:
SN100 and SN102 MIDI ports can be used instead of local ports.
Top of Page
file:///C|/LIGHTP/HELP.ENG/page15.htm (23 of 23)11/2/2004 3:02:29 AM