GeniusPro/Lightpalette Operator's Manual - Strand Lighting

Setup QR
Trig Macro 1..1999 Number of macro to run.
Console Setup
Key Sequence
[REPORT] {ADV SETUP}
{CONSOL SETUP}
Action
Display Console Setup Screen
The Console Setup is described under the main windows of the screen as follows:
●
●
●
●
Output Connections Window
Network Window
Communications Window
External Submasters
Output Connections Window
Select option using trackball or mouse and change values by numeric entry, increment or
decrement using [+] [-] or wheel or set to factory default with {DEFAULT} soft key.
Function Option/Range Action/Example
D54/AMX Not
applicable to 300 Series
Consoles.
Off, AMX Out, D54 Out
Which analogue MUX port
to use
Start 1..2048
1st MUX address
transmitted
Scaling 80..120
Scale factor
DMX1/2/3/4 (DMX1 and
2 only on 300 Series Off, DMX OUT, DMX IN Port functions
Consoles)
Start 1..2048
1st MUX address
transmitted
End 1..2048
Last MUX address
transmitted
file:///C|/LIGHTP/HELP.ENG/page58.htm (12 of 16)11/2/2004 3:03:38 AM