GeniusPro/Lightpalette Operator's Manual - Strand Lighting

CommuniquePro2
[CLR] Cancels time editing event selection. Sets FIRST and LAST on Event List LCD to 0.
Clears highlights.
Editing Timecodes
The Edit Times menu is accessed from the Event List Menu by selecting the {EDIT TIMES}
softkey. This menu is used to edit the time codes in the Event List.
Softkeys on the Edit Times Menu allow the event time codes of selected events to be set or
edited as follows:
{+HH} Adds one hour to all selected timecodes.
{+MM} Adds one minute to all selected timecodes.
{+SS} Adds one second to all selected timecodes.
{+FF} Adds one frame to all selected timecodes.
{+5FF} Adds five frames to all selected timecodes
{BACK} Returns to the Event List LCD menu.
When the [SHIFT] key is pressed the above keys change to decrement keys.
Pressing the [TIME] key when the Edit Times Menu is displayed will display the word
TIMECODE on the command line and changes the softkeys on the Edit Times Menu or Event
List menu to the following:
{:} Used as timecode field separator.
{MOVE TO} Used to move the starting time of a range of timecodes.
{COPY TO} Used to copy a range of events and specify a new starting timecode.
{START} Used to set the playback start time
{STOP} Used to set the playback stop time
The following examples show the use of the command line and [TIME] key to edit timecodes in
the event list.
Key entry: [1] [THRU] [3] [TIME] [1] {:} [2] {:} [3] {:} [4] [*]
Action: Sets event times 1 to 3 to 01:02:03:04
Key entry: [TIME] [1] {:} [*]
Action: Sets event times 1 to 3 to 01:??:??:?? (MM,SS,FF unchanged)
Key entry: [TIME] {:} [2] [*]
Action: Sets event times 1 to 3 to ??:02:??:?? (HH,SS,FF unchanged)
Key Entry: [TIME] {:} {:} {:} [4] [*]
Action: Set event times 1 to 3 to ??:??:??:04 (HH,MM,SS unchanged)
Moving or Copying Events With Time Edit Commands
file:///C|/LIGHTP/HELP.ENG/page49.htm (9 of 13)11/2/2004 3:02:21 AM