GeniusPro/Lightpalette Operator's Manual - Strand Lighting

Front
- Option to allow record/update pre Inhibit subs & grand masters.
- Option to not have seperate Preview cue, on entry to preview use 'current' cue.
- Password number of Attributes increased on CI build of sw:
300 & non I consoles - as before:
(300 has 600 Int limit, non i has 1500 int limit)
Ints Atts
25 1
50..75 50
100 100
125 125
150..175 150
200..225 200
250..375 250
400..775 400
800..1500 500
i consoles:
(6000 Int limit)
Ints Atts
25..1000 25..1000 (Same number as Ints)
1025..3000 1050..5000 (1000 + (2 * (Ints - 1000)))
3025..6000 4075..2000 (Int + Att == 8000)
- Add new Shape generation attributes.
Additional software features on version v2.5k
- PS/2 mouse now reliable on all consoles. After changing in User Setup need to wait 2 seconds before
mouse will operate.
- 510i P3 key working again.
- Fix startup delay on 300 consoles when network set to on.
Additional software features on version v2.5e
- Tracked cues with zero level in non first part load correctly.
- Channels In Use printout corrected.
Additional software features on version v2.5d
- Only active channels set via HandHeldRemote are ignored on Update except if it is the HHR doing
the updating in which case they are used. Previous HHR selections are Updated. In this way all 'red'
channels are updated.
Additional software features on version v2.5c
- DMX level of 1 is now shown as 1% rather than 0%.
- Channel control channels at 0% are now added when updating into non tracking cues, groups &
submasters. Use CHANSIN to stop new channels from being added.
- Support iPAQ WiFi hand held remote.
- Attribute names have changed to better reflect their use. See fixture.lib for details.
Additional software features on version v2.5b
file:///C|/LIGHTP/HELP.ENG/page0.htm (7 of 13)11/2/2004 3:02:19 AM