GeniusPro/Lightpalette Operator's Manual - Strand Lighting

Common Commands QR
- {LOAD SOFT}
Loads operating or application software.
Refer toLoading Software or Adding
Additional Channels or Applications
Network Backup Commands
The following commands are common to Command Line and Direct Action modes for
GeniusPro and Lightpalette.
Key Sequence Action
Provides the following backup command
[MORE] {BACKUP CMDS}
softkeys:
- {M GIVE SYNC} Main give sync to backup.
- {M TAKE SYNC} Main give control to backup.
- {M GIVE CTRL} Main take control from backup.
- {M TAKE CTRL} Main take sync from backup.
- {BREAK SYNC} Break sync.
Quick Give Sync when not already in
sync. Connects main and backup for
- [SHIFT] {M GIVE SYNC}
tracking without transferring show or
console status.
Quick Take Sync when Backup has taken
control. Connects main and backup for
- [SHIFT] {M TAKE SYNC}
tracking without transferring show or
console status.
Resets many console parameters to
power-up defaults. It is run automatically
- {RESET DESK}
at the end of the Give/Take Sync
commands, but is available manually
here.
Steal control back from other consoles or
[SHIFT] [CLR]
handhelds, if command line clear.
file:///C|/LIGHTP/HELP.ENG/page54.htm (19 of 19)11/2/2004 3:03:26 AM