GeniusPro/Lightpalette Operator's Manual - Strand Lighting

Submasters (Command Line Mode)
[UPDATE] [SUB] [2] [*]
[SHIFT] [SUB]
[UPDATE] [SUB] Bump Key
[1] [+] [2] [SUB] [-] Bump Key
[UPDATE] [SUB] [1] [*]
[SUB] [7] [*] [UPDATE] [SUB] [1]
[*]
[UPDATE]{ADD ALL} [SUB] # [*]
All o/p chans in sub 2 under
channel control are updated,
released from channel control and
the sub rerun
= [UPDATE] [SUB]
All o/p chans in sub n under
channel control are updated,
released from channel control and
the sub rerun
Remove chans 1 +2 from
submaster leaving level on output.
Records levels that have been
modified live into submaster 1,
excluding levels of channels that
are not already in the submaster.
First selects all of the channels in
submaster 7, then updates their
levels in submaster 1, excluding
levels of channels that are not
already in the submaster.
Changes levels in the specified
submaster as necessary based on
channels that have been modified
live. Adds modified channels (that
are not already in the submaster,
and channels that have been
removed from the modified list by
using [SHIFT] [CLR]. Channels that
are off in the selection will be
removed from the submaster. The
submaster fader must be set above
zero. This command works only
from the Live display.
file:///C|/LIGHTP/HELP.ENG/page66.htm (6 of 7)11/2/2004 3:03:35 AM