GeniusPro/Lightpalette Operator's Manual - Strand Lighting

Groups
set in the specified group. The cue, effect step, or submaster then takes levels for the selected
channels from the group, so if you change the group the recorded item will also change.
[1] [THRU] [4] [@]GROUP] [3] {INTS ONLY} [*]
Sets channels 1 through 4 intensities only to the levels set in group 3.
chan [@] [GROUP] # {ATTS ONLY} [*] sets attributes only for the selected channels to the levels set
in the specified group. The cue, effect step, or submaster then takes levels for the selected channels
from the group, so if you change the group the recorded item will also change.
[1] [THRU] [3] [@] [GROUP] [5] {ATTS ONLY} [*]
Sets channels 1 through 3 attributes only to the levels set in group 5. This command requires a
Pentium processor (or better) and the Tracker software. For additional information, refer to Tracker
Software
Viewing and Editing Groups
Once you have recorded groups, you can view and edit them in the Group display. You can also use
the Group display to create new groups.
Note: Changing levels while in this display changes the recorded levels in the current group without a
record command and without warning you.
Updating and Adding to Groups
[UPDATE] [GROUP] # [*] changes levels in the specified group as necessary based on channels that
have been modified live (red or purple channels on the Live display). This command excludes
channels that are not already in the group, and channels that have been removed from the modified list
by using [SHIFT] [CLR].
Note: When using groups the [UPDATE] key is set to default to update only channels already in the
group. Pressing the [UPDATE] key as part of a group command syntax, e.g., [UPDATE] [GROUP] #
[*] is the same as entering [UPDATE] {CHANS IN} [GROUP] # [*]. So when updating a group to
include only changes in channels already in the group, there is no need to use the {CHANS IN}
softkey. The {CHANS IN} softkey is used, as necessary, when updating cues.
Channels that are off in the selection will be removed from the group.
[UPDATE] [GROUP] [1] [*] (All Modes)
file:///C|/LIGHTP/HELP.ENG/page23.htm (5 of 11)11/2/2004 3:02:42 AM