GeniusPro/Lightpalette Operator's Manual - Strand Lighting

Submasters
●
Text
These properties are associated with the fader and not the submaster, so they are common across all
submaster pages.
Submaster Function
When a submaster number is set to a function, that function applies to the submaster on all submaster
pages. The same submaster cannot have different functions on different submaster pages.
Each submaster fader can have one of several functions. The submaster function is initially set to
Normal for all submasters. You can eliminate or move any supermaster, and change submaster
functions for other submaster faders as needed.
Submaster functions are one of the following values:
●
●
●
●
●
●
●
●
●
●
●
●
●
Pileon Submaster (Normal)
Independent Submaster (Indep)
Exclusive Submaster (Exclusive)
Inhibitive Submaster (Inhibit)
Sound to Light Submaster (S/Light) (500 Series Consoles only)
DMX Channel Submaster (DMX Chan)
DMX Dimmer Submaster (DMX DMNR)
Submaster Supermaster (Sub Super)
Effects Supermaster (FX Super)
Flash Supermaster (Flash SPR)
Grandmasters (GM1, GM2)
Audio Threshold Supermaster (AUDO THR) (500 Series Consoles only)
Midi Ratio Supermaster (MIDI RATI)
NORMAL (Pileon submaster) - Default
Submaster intensities are combined with effects, playbacks, and other submasters on a highest takes
precedence basis. Attributes are combined on a latest takes precedence basis. Selecting a channel
with the Channel Control steals it from the submaster.
INDEP (Independent submaster)
Submaster intensities are combined with effects, playbacks, and other submasters on a highest takes
precedence basis. Attributes are combined on a latest takes precedence basis. Submaster channels
file:///C|/LIGHTP/HELP.ENG/page24.htm (6 of 25)11/2/2004 3:02:50 AM