GeniusPro/Lightpalette Operator's Manual - Strand Lighting

Profiles
The title bar shows the date and time, display name, show name, and grandmaster status. The
date and time format can be set in the Console Time window of the second Setup display
State screen. The show name is preceded by an asterisk (*) when changes have been made
to the show since you last saved it.
The profile graph is scaled in percentage and shows profile processor input levels across the
bottom and output levels up the side. When you create a new profile it starts as a linear curve
(0% in = 0% out, 50% in = 50% out, etc.).
The Current Profile
The current profile is shown with a highlight on the State screen. To change the current profile,
use [NEXT], [LAST], or the Trackball or mouse to move the highlight to the appropriate profile.
The highlight must be on the profile number (the Profile field) to change the current profile. You
must be in the Profile display before you can use the Trackball, or mouse to change the
current profile.
file:///C|/LIGHTP/HELP.ENG/page26.htm (3 of 9)11/2/2004 3:03:08 AM