GeniusPro/Lightpalette Operator's Manual - Strand Lighting

Profiles + Macros QR
[-] Decrease selected point by 1%.
Recording and Editing Profiles (Direct Action Mode)
The following Direct Action syntax examples are normally used with GeniusPro and are
common to Direct 1 Digit and Direct 2 Digit command modes
Key Sequence
At any window:
[PROFILE] [1] [*]
[PROFILE] [1] [TEXT] hello [*]
Action
Select profile 1 for edit, create if absent
Set profile text to hello
At profile or graph window:
{DELETE PROF} [*]
Delete selected profile
{DELETE PROF} [2] [*]
Delete profile 2 if present
{DELETE PROF} [1] [THRU] [6] [*] Delete profiles 1 thru 6 if present
Add a new point at (x=15%, y=20%). If
[1] [5] [@] [2] [0]
x=15% already has a y value, the new
value takes its place.
Add a new point at (x=15%, y=100%). If
[1] [5] [@] {FULL}
x=15% already has a y value, the new
value takes its place
[1] [5] [@] {DMX} [2] [5] [5] [*] Add a new point at (x=15%, y=255).
[1] [5] [@] [*] Delete point at (x=15%)
{DMX} [5] [0] {DMX} [2] [5] [5] [*] Add a new point at (x=50, y=255).
{DMX} [5] [0] [*]
Delete point at (x=50)
At profile window:
{GRAPH EDIT}
Start graph-editing the selected profile
with the track ball, or mouse.
At graph window:
{INSERT POINT}
Insert a new point at the track ball or
mouse cursor
[+] Increased selected point by 1%.
[-] Decrease selected point by 1%.
file:///C|/LIGHTP/HELP.ENG/page68.htm (2 of 5)11/2/2004 3:03:35 AM