GeniusPro/Lightpalette Operator's Manual - Strand Lighting

Macros
This adds the keystrokes into macro 24 that will run cue 20.
[CLR] deletes the last key while editing the macro. This key cannot be recorded into the macro while
editing it although it can be recorded by [MACRO] # {LEARN}.
Macro Tablet
This section covers the following topics:
❍
❍
❍
❍
Setting Up the Macro Tablet
Using the Macro Tablet
Fitting the Macro Tablet Template
Defining, Learning, Editing and Deleting Macro Tablet Macros
Setting Up the Macro Tablet
A Wacom Intuos A4 A4 Oversize or A3 graphic tablet can be used with the main console, or a net
node on the COM1 or COM2 port.
When the Macro Tablet field of the User Setup Screen is set to INTUOUS A4 INTUOUS A4 OS or
INTUOUS A3 and the PORT field set to COM1 or COM2, you can define macros and activate them
from a A4 or A3 macro tablet overlay.
A number of different standard overlays are available on the version 2.4 CD. The overlay to use
depends on the setting of the MACRO TABLET and MODE fields of the User Setup Screen, as follows.
Macro Tablet Mode
Grid to
Use
No. of Macros
INTUOS MACRO (LOW) 20 x 10 200
INTUOS MACRO (MED) 20 x 20 400
INTUOS
MACRO
(HIGH)
40 x 20 800
CONCEPT A4 MACRO (LOW) 20 x 10 200
CONCEPT A4 MACRO (MED) 20 x 20 400
CONCEPT A4
MACRO
(HIGH)
40 x 20 800
INTUOS A4
OS
MACRO (LOW) 20 x 16 320
INTUOS A4
OS
MACRO (MED) 20 x 32 640
file:///C|/LIGHTP/HELP.ENG/page30.htm (8 of 10)11/2/2004 3:02:58 AM