GeniusPro/Lightpalette Operator's Manual - Strand Lighting

Submasters (Command Line Mode)
[*]
With Edit fields Green as above
highlight the Bump field of the
required Sub number and adjust its
value to Flsh, F+S, OFF, Mac or Solo
Returns fields in the Sub Preview
displays to the non-editable mode
(Yellow)
Sets the individual submaster bump
key to:
Flsh: Flashes the Sub channels to
the level set by the Flash
Supermaster (if any), or 100%
F+S: As above. All other (nonbumped)
channels are set to zero
OFF: Sub Bump key has no effect.
Mac: Triggers the macro with the
same number as the bump button
(not the macro assigned to the bump
button)
Solo: Sub channels unffected. All
other channels are set to zero
Pressing the submaster bump keys
to latch as described above until the
{KEYS LATCH}
sub bump button is pressed again.
No effect if individual sub bump
mode is set to OFF.
[SUB] [1] [TIME] [4] [/] [5] [*] Sets sub 1 to split fade times
[SUB] [1] [@ATT] [TIME] [6] [*] Sets sub 1 attribute fade time.
[SUB] [1] {EXT SUB} [6] [*] Sets sub 1 link to external sub 6.
[SUB] [1] {FUNCTION}
{SUB FUNC} {NORMAL} [*]
[SUB] [1] {FUNCTION} {SUB
FUNC} {INHIBIT} [*]
[SUB] [1] {FUNCTION} {SUB
FUNC} {SUPER I/P} {DMX IN
CHAN} [*]
Sets sub 1 with function = Pileon
(normal)
Sets sub 1 with function = inhibitive
Records sub 1 with function = DMX
Channel Submaster
[SUB] [1] [MACRO] [6] [*] Sets sub 1 linked to macro 6.
[SUB] [1] [FX] [4] [*] Sets sub 1 linked to effect 4.
[SUB] [1] [TEXT] hello [*]
Sets sub 1 to text hello.
[SUB] [1] [UNDO]
Restore Sub 1's channels to fader
control.
file:///C|/LIGHTP/HELP.ENG/page66.htm (4 of 7)11/2/2004 3:03:35 AM