GeniusPro/Lightpalette Operator's Manual - Strand Lighting

Channel levels, attributes and Dimmers cl mode QR
Copy DMX In channel 1 level to
channel 1, or copy a list of channels
[1] [@] {COPYFROM} {DMX} if specified, or copy the current
selection channels, or copy all 512
DMX In channels if no selection
1 to 20%, for this cue only (only valid
at cue preview display in track
[1] [@] [2] [Q ONLY/TRACK] [*]
mode). Q ONLY/TRACK is valid in
any [@] command.
[1] [@] [+] [20] [*] 1 up by 20% absolute
[1] [@] [-] [1] [1] [*] 1 down by 11% absolute
[1] [ON]
[1] [@] [ON] [*]
Select IntChan 1, set to On Level %
set in User Setup Screen
[1] [OFF] Select IntChan 1, set to zero
[3] {FULL}
[3] [@] {FULL}
[3] [SHIFT] [ON]
Select IntChan 3, set to 100%
[3] [@] {SHIFT] [ON]
[1] [REMDIM]
[1] [SHIFT] [-]
[1] [@] [5] [REMDIM]
[REMDIM] [REMDIM]
[1] {BUMP}
[1] [SHIFT] [+]
[SHIFT] [+]
[SHIFT] [*]
[1] {FLASH^}
All IntChans except 1 are set to off.
If 1 is off, it is set to On Level %.
Set IntChan 1 to 50% and set others
to off in same command.
If no selection, all IntChans are set to
OFF (Blackout)
According to BUMP MODE key:
IntChan 1 is soloed (most keys now
locked out) or flashed to Flash
Supermaster level, or both, until key
released
Toggle on: IntChan 1 is soloed
(most keys now locked out)
Toggle off: All soloed IntChans go
unsoloed (all keys re-enabled)
Restore last command for edit
IntChan 1 is flashed to Flash
Supermaster level until key is
released
file:///C|/LIGHTP/HELP.ENG/page55.htm (2 of 8)11/2/2004 3:03:28 AM