GeniusPro/Lightpalette Operator's Manual - Strand Lighting

Channel levels, attributes and Dimmers QR
[1] [@] {COPYFROM}
[GROUP] [9]
{ATTS ONLY} [*]
[1] [@] {COPYFROM}
[GROUP] [9]
{ATTS ONLY} [*]
Copy AttChan 1 from
group 9
[1] [@] {COPYFROM}
[TEXT] hello [TEXT]
{ATTS ONLY} [*]
[UNDO] [@ATT]
[1] [@] {COPYFROM}
[TEXT] hello [TEXT]
{ATTS ONLY} [*]
[UNDO] [@ATT]
Copy AttChan 1 from
group with text label
'hello' (Groups 1 to
750)
Udoes command after
[@ATT]
[SHIFT] [@ATT] [*] [SHIFT] [@ATT] [*] = [UNDO] [@ATT]
**Refer to Attribute Filters
Fading in Attribute Channels in Time
The following Direct Action syntax examples are normally used with GeniusPro.
Direct Action
Single Digit
[1] [.] [3] [TIME] [5] [@]
[6]
[1] [.] [2] [TIME] [@]
[5]
Direct Action
Double Digit
[1] [.] [3] [TIME] [5]
[@] [6] [0]
[1] [.] [2] [TIME] [@]
[5] [0]
Action
Moves the channel 1
luminaire pan to 60% over a
period of 5
seconds.
Moves the channel 1
luminaire color to frame 5
over a period determined by
the setting of the Undo
Time.
Controlling Dimmers (Direct Action Mode)
The following Direct Action syntax examples are normally used with GeniusPro
file:///C|/LIGHTP/HELP.ENG/page56.htm (8 of 10)11/2/2004 3:03:30 AM