GeniusPro/Lightpalette Operator's Manual - Strand Lighting

Patching QR
Key Sequence Action
{CHAN} [1]
{DELETE CHAN} {DELETE CHAN}
Deletes channel 1 completely
(intensity and attributes)
{CHAN} [1] [.] [1]
{DELETE CHAN} {DELETE CHAN}
Deletes channel 1 intensity.
{CHAN} [1] [.] [2]
{DELETE CHAN} {DELETE CHAN}
Deletes channel 1 attribute.
{CHAN} [3] [THRU] [5]
{DELETE CHAN} {DELETE CHAN}
{CHAN} [1] [THRU] [1] [0]
{CLEAN ATTS} [*]
Deletes channels 3, 4, and 5
completely (intensity and attributes).
Deletes unpatched attributes from
outputs 1 to 10. If any of the
unpatched attributes are contained in a
Cue or Group, confirmation is
required before deletion.
Renumbering Channels
The following commands are common to Command Line and Direct Action modes for
GeniusPro and Lightpalette.
Key Sequence Action
{CHAN} [2] [6]
{RENUM CHAN} [3] [6] [*] Renumbers channel 26 to start at 36
file:///C|/LIGHTP/HELP.ENG/page59.htm (6 of 6)11/2/2004 3:03:27 AM