GeniusPro/Lightpalette Operator's Manual - Strand Lighting

Tracker Software
Copying Attributes
Enter the output number (or range of outputs), of the attribute(s) to be copied, followed by the {COPY
PATCH} softkey and the output number (or first output number), where the attribute(s) has to be
copied, then [*]. A confirmation is requested after each command. Press [*] again.
[1] {COPY PATCH} [1] [0] [*]
Copies attribute on output 1 to output 10
[1] [THRU] [10] {COPY PATCH} [1] [1] [*]
Copies attributes on outputs 1 to 10 to outputs 11 to 20.
Press {BACK} to return to the LCD Set Patch Menu.
Copying Fixtures
Enter the first output number (or range of outputs) of the fixture(s) to be copied, followed by the {COPY
PATCH} softkey and the first output number where the fixture has to be copied to, then [*]. A
confirmation is requested after each command. Press [*] again.
[2] [2] {COPY PATCH} {4] [4] [*]
Copies the fixture starting on output 22 to start on output 44.
[2] [2] [THRU] [5] [2] {COPY PATCH} [5] [4] [*]
Copies the fixtures patched to outputs 22 to 52 to start on output 54.
Press {BACK} to return to the LCD Set Patch Menu.
Copying Patch Screens
You can copy the entire contents of Patch 1 to Live Patch 2.
{COPY PATCH} confirmation required {COPY PATCH}
Press {BACK} to return to the LCD Set Patch Menu.
Moving Patch Information
Press {SET} from the LCD Patch Menu to display the LCD Set Patch Menu. Press {COPY SWAP} to
display the Copy Patch Menu.
Moving Attributes
Enter the output number, or range of outputs, of the attribute to be copied, followed by the {MOVE
PATCH} softkey and the output number where the attribute(s) has to be moved to, then [*].
A confirmation is requested after each command. Press [*] again.
file:///C|/LIGHTP/HELP.ENG/page10.htm (12 of 20)11/2/2004 3:02:46 AM