GeniusPro/Lightpalette Operator's Manual - Strand Lighting

Effects (Command Line Mode)
Sets FX 1 to stop after 12 complete
[FX] [1] {STOP AFTER} [1] [2] [*]
cycles
[FX] [1] {STOP AFTER}[TIME]
[1] [2] [*] Sets FX 1 to stop after 12 seconds
[FX] [1] {STOP AFTER} [SUB] [*]
[FX] [1] {STOP AFTER} [.] [*]
[FX] [1] {LEVEL} [RANDOM] [*]
[FX] [1] {LEVEL} [NORMAL] [*]
[FX] [1] {LEVEL} [NEGATIVE] [*]
[FX] [1] {LEVEL} [NORM/NEG] [*]
[FX] [1] {LEVEL} [NEG/NORM] [*]
[FX] [1] [TIME] [1] [*]
[FX] [1] [TIME] [3] [/] [2] [*]
[FX] [1] [TIME] [3] [/] [*]
[FX] [1] [TIME] [/] [2] [*]
[FX] [1] [.] [2] [TIME] {STEP TIME}
[.] [3] [*]
[FX] [1] [.] [2] [TIME]
{STEP I/D/O} [*]
[FX] [1] [.] [2] [TIME]
{STEP I/D/O} [.] [2] [/] [.] [3] [/] [.] [2]
[*]
Sets FX 1 to stop when the
submaster fader it is attached to is
brought to 0%
Sets FX 1 to stop when the last step
is run after the FXSTOP key is
pressed
Sets FX 1 intensity type for all steps
to Random
Sets FX 1 intensity type for all steps
to Normal
Sets FX 1 intensity type for all steps
to Negative
Sets FX 1 intensity type for all steps
to Normal/Negative
Sets FX 1 intensity type for all steps
to Negative/Normal
Sets FX 1 overall intensity fade in/out
times to 1s.
Sets FX 1 overall intensity fade in/out
times to 3 and 2secs respectively.
Sets FX 1 overall intensity fade in
time to 3s.
Sets FX 1 overall intensity fade out
time to 2s.
Sets FX1 step 2 Step Time to 0.3sec.
Sets FX 1 step fade times for step 2
to in = 0, dwell = OFF, out = 0.
Sets FX 1 step fade times for step 2
only to in = 0.2, dwell = 0.3, out = 0.2.
[FX] [1] [.2] [TIME] {STEP I/D/O} [.]
[2] [/] [/] [.] [2] [*]
Sets FX 1 step fade times for step 2
to in = 0.2, out = 0.2.
file:///C|/LIGHTP/HELP.ENG/page62.htm (4 of 9)11/2/2004 3:03:32 AM