GeniusPro/Lightpalette Operator's Manual - Strand Lighting

Front
- 16bit attributes follow cue & effect fade time profiles.
- Default for Cue Sheet Macros is now Main Console as this is most useful to most users.
- Same cue loaded in X playback preview after a Main/Backup sync.
- Current Cue set to the X playback stage cue (last to complete) after a Main/Backup sync.
- X playback shows running wait time in all display formats.
Additional software features on version v2.7.1
- Dimmer fault log shows current faults in red & subsided faults in yellow.
- Dimmer fault log Clear clears subsided faults only, use Shift Clear to clear the whole log.
- Current Cue set to the X playback preview cue after a Main/Backup sync.
Additional software features on version v2.7.0
- Add syntax for moving attributes around in part cues as per existing '[chan list] *' syntax:
[chan list] SOFTBLOCK * move intensity & attribute channels
[chan list] @ SOFTBLOCK * move intensity & attribute channels
[chan list] @ATT SOFTBLOCK * move attribute channels only
[chan list] @ATT attfilter SOFTBLOCK * move just attfilter attribute channels
[chan list] @ INTS/ATTS_ONLY SOFTBLOCK * move just intensity/attribute channels
- Channel control actions work when setting automodded levels in preview with automod On.
- Show running Auto Move & Auto Preheat cues on X playback when in Cue Sheet order.
- Auto Move & Auto Preheat cues on X playback show in different colours to avoid confusion with 'real'
cues.
- Add '@ Q-Only/Track Level' syntax to range cue update when in single digit mode.
- Do not affect attribute values on range update syntax: [chan list] UPDATE CUE a THRU b @ Lev *
- Cue range automod update applies changes Q-Only/Track when in a tracking mode.
- Ensure valid channels on [chan list] REMDIM syntax.
Additional software features on version v2.6.15
- Stop net backoff problems when multiple remote users connected via WiFi networks.
Additional software features on version v2.6.14
- Support xConnect text keys.
Additional software features on version v2.6.13
- Support xConnect Login/Monitor connections.
- Backup 300 with SMPTE card but no panels connected correctly tracks keys from Main 300
command panel.
Additional software features on version v2.6.11
- MIDI tracking backup improvements. A backup only processes midi when in sync or when in control.
If Main & Backup both have MIDI ports then each use their own port. This requires a MIDI cable to the
IN port of Main & then another cable from the THRU port of Main to the IN port of Backup. If Main has
MIDI but Backup does not then both use the Mains (as in previous sw versions). If Main has no MIDI
then regardless of what the Backup has no MIDI is processed. MIDI via a SN node always works. MIDI
is only output by the console that is currently in control.
file:///C|/LIGHTP/HELP.ENG/page0.htm (3 of 13)11/2/2004 3:02:19 AM