GeniusPro/Lightpalette Operator's Manual - Strand Lighting

Events & Console Reporter QR
[CUE] [*]
Clears cue from currently marked event
number.
[6] [FX] [1] [*] Assigns effect 1 start to event 6
[1] [0] [FX] [-] [1] [*] Assigns effect 1 stop to event 10
[6] [FX] [*] Clears effect start.
[1] [2] [SUB] [2] [4] [*] Assigns sub 24 bump up to event 12
[1] [3] [SUB] [-] [2] [4] [*]
Assigns sub 24 bump down to the
specified event.
[1] [2] [SUB] [*] Clears bump up command.
[2] [5] [MACRO] [2] [0] [0] [*] Assign macro 200 to event 25
[2] [5] [MACRO] [*] Clears all macro commands in event 25
Select event number 1 for time editing.
[1] [*]
Displays > marker against event 1. Sets
FIRST and LAST on Event List LCD to
1
Selects and highlights event range 2 to 5
[2] [THRU] [5] [*]
for time editing. Sets FIRST on Event
List Menu to 2 and LAST to 5.
Cancels time editing event selection. Sets
[CLR]
FIRST and LAST on Event List LCD to
0. Clears highlights.
Editing Event Times - SMPTE Time Code Events
Key Sequence Action
{EDIT TIMES}
Changes LCD softkey menu to enable
editing of event times
{+HH}
Adds one hour to all selected timecodes.
{+MM}
Adds one minute to all selected
timecodes.
{+SS}
Adds one second to all selected
timecodes.
{+FF}
Adds one frame to all selected
timecodes.
Adds five frames to all selected
{+5FF}
timecodes
file:///C|/LIGHTP/HELP.ENG/page69.htm (2 of 7)11/2/2004 3:03:27 AM