GeniusPro/Lightpalette Operator's Manual - Strand Lighting

Basic Recording
[CUE] [1] [TIME] [*] All Modes
Sets cue 1 fade time to the manual fade up and down (MAN/MAN)
[CUE] [1] [TIME] [4] [*] All Modes
Changes cue 1 up and down fade times to 4 seconds without changing any levels.
[SUB] [1] [TIME] [4] [/] [2] [*] All Modes
Changes submaster 1 up fade time to 4 seconds and its down fade time to 2 seconds without
changing any levels.
[FX] [1] [TIME] [/] [2] [*] All Modes
Changes the effect 1 down fade time to 2 seconds without recording new levels. Does not
change the up fade time.
[CUE] [TIME] [4] [/] [*] All Modes
Changes the current cue up fade time to 4 seconds without recording new levels. Does not
change the down fade.
Editing In a Preview (Blind) Display
When you are in a blind display (the Submaster, Preview, Group, and Effect displays),
changing a level or property automatically records it into the currently displayed item Preview,
Group, or Effect
Changing Channel Levels
You can use Channel Control commands (for example [1] [@] [1], [CUE] [1] [@] [5]) to set
and record channel levels. Some of the soft keys and the Level Wheel are not available in
preview (blind) displays. Otherwise the syntax for recording is the same from all locations.
Changing Properties
Properties for setup, cues, submasters, effects, and groups can be changed by editing
property fields in the State screen of the appropriate display.
To select a field, use the Trackball to move the highlight to the field.
To reset a field in the Effect Screen press {DEFLT}.
Copying From a Preview (Blind) Display
file:///C|/LIGHTP/HELP.ENG/page25.htm (8 of 9)11/2/2004 3:02:48 AM