GeniusPro/Lightpalette Operator's Manual - Strand Lighting

Cues and X Playbacks (Direct Entry Mode)
[CUE] [1] [TIME] [5] [/] [6] [GO]
[CUT]
[STOP/BACK]
Load cue 1 using these split times, and
run
Run preview cue on X using X Back, Cut
setup time
1st press: Stop all fades on X selected
playback
2nd press: Reverse previous fades to 0%
complete
3rd press: Reverse previous cue using X
Back, Cut setup time
[GOTO] [CUE] [6] [*]
[GOTO] [CUE] [6] [TIME] [6] [/] [7]
[*]
[GOTO] [CUE] [6] [PB] [2] [*]
[CUE] [0] [CUT]
[CUE] [1] [TIME] [5] [CUT]
[LOAD]
[CUE] [1] [LOAD]
[CUE] [1] [TIME] [5] [LOAD]
{RATE} (See below for 300 Series
Consoles)
{UNRATE}
{UPRATE}
{DOWNRATE}
Goto cue 6 in recorded times (no wait
time or Fx or macro)
Goto cue 6 in these times (no wait time
or Fx or macro)
Goto cue 6 on playback 2 (no wait time
or Fx or macro)
Run blackout cue on X Playback
using X Back, Cut setup time
Cut to cue 1 in these times (no wait time)
Load current cue on X
Load cue 1 on X Playback
Load cue 1 on X using these times
Puts all fades on a playback under Rate
Wheel control
Removes all fades on a playback from
Rate Wheel control
Sets the rate wheel to control the up fade
rate when under rate wheel control
Sets the rate wheel to control the down
fade rate when under rate wheel control
Rate control of cue fades using the level wheel - 300 Series Consoles only
[RATE] key 1st Press
Up and Down Fade under level wheel
control- Both LEDs illuminated
[RATE] key 2nd Press
Up only Fade - Up only LED
illuminated
[RATE] key 3rd Press
Down only fade - Down only LED
illuminated
file:///C|/LIGHTP/HELP.ENG/page61.htm (7 of 10)11/2/2004 3:03:32 AM