GeniusPro/Lightpalette Operator's Manual - Strand Lighting

Groups
❍ Group 998.3 - *Partition 3
❍ Group 999.1 - *Grand Master 1
❍ Group 999.2 - *Grand Master 2
❍ Group 999.3 - *X Playback 1
❍ Group 999.4 - *X Playback 2
❍ Group 999.5 - *Preheat
ON console
Controls the ON level for channels controlled from the main console. All channels are initially off (blank
level). If a channel has a level in this group, the ON level is taken from the group. If not, the ON level is
taken from the On Level % field in the User Setup Screen
ON 2 & ON 3
Controls the ON level for channels controlled from the remote consoles. All channels are initially off
(blank level). If a channel has a level in this group, the ON level is taken from the group. If not, the ON
level is taken from the On Level % field in the User Setup Screen
ON Handheld
Controls the ON level for channels controlled from the handheld remote. All channels are initially off
(blank level). If a channel has a level in this submaster, the ON level for the handheld remote is taken
from the submaster. If not, the ON level is taken from the On Level % field in the User Setup Screen
Display console
Controls what channels will be shown on the main console level displays if the Channel Formatting
field in the User Setup Screen is set to DISPLAY GROUP. All channels are initially set to FL, and can
only be set to off and FL. If a channel has no level in this group, it will not show on any of the Levels
screens (including the Group display). If channel formatting is set to AUTO, channels are added to the
display groups as they are used. This is an easy way to automatically create a display group based on
channels actually used in the show.
Display 2 & Display 3
Controls what channels will be shown on the remote console level displays if the Channel Formatting
field in the User Setup Screen is set to DISPLAYGROUP. All channels are initially set to FL, and can
only be set to off and FL. If a channel has no level in this group, it will not show on any of the Levels
screens (including the Group display). If channel formatting is set to AUTO, channels are added to the
display groups as they are used. This is an easy way to automatically create a display group based on
channels actually used in the show.
Partition Console, Partition 2 & Partition 3
Determines what channels will be controlled by each console if the Channel Partitioning field in the
Show Details window of the Show Setup Screen is set to ON. All channels are initially set to their
file:///C|/LIGHTP/HELP.ENG/page23.htm (2 of 11)11/2/2004 3:02:42 AM