GeniusPro/Lightpalette Operator's Manual - Strand Lighting

User Setup
Undo Time
The time for an undo action to complete. It can be any value between 0 and 59 minutes 59
seconds, and is initially set to 2. Times below one minute can be specified in the range 0.1 to
59 seconds.
Console Window
The Console window is in the User Setup display, and lets you configure the displays, LCD,
buzzer and other miscellaneous functions.
The fields within the Console Window are desribed as follows:
■ Number of Screens
■ LCD Contrast/Backlight
■ Gooseneck Brightness
■ Buzzer Volume
■ Macro Tablet
■ Mouse
■ Console Keys Layout
■ Submaster Layout
■ GeniusPro, Lightpalette, Default
Number Screens
Sets the number of console screens. Can be 1, 2 (default), 3, or 4.
Note: All consoles can support one or two video monitors in the standard configuration and up
to four monitors with an optional video card fitted.
LCD Contr, Backlt
The first field changes the contrast on all three LCD’s (2 on a 520). Use the Level Wheel to
adjust this for the best display contrast.
# A number from 1 to 100 (default 4) giving maximum to minimum contrast.
The second field changes the backlight brightness on all three LCD’s. Use the Level Wheel to
adjust this for the best visibility.
file:///C|/LIGHTP/HELP.ENG/page18.htm (19 of 21)11/2/2004 3:02:40 AM