GeniusPro/Lightpalette Operator's Manual - Strand Lighting

User Setup
Cue Fade Up/Down
The default up and down fade times recorded in a newly created cue. The up and down times
are separate fields. They can be any value between 0 and 59 minutes 59 seconds, and are
initially set to 5/5 seconds. Times below one minute can be specified in the range 0.1 to 59
seconds.
Cue Delay Up/Down
The default up and down delay times recorded in a newly created cue. The up and down times
are separate fields. They can be any value between 0 and 59 minutes 59 seconds, and are
initially set to 5/5. Times below one minute can be specified in the range 0.1 to 59 seconds.
Cue Wait
The default wait time recorded in a newly created cue. It can be OFF or any value between 0
and 59 minutes 59 seconds, and is initially set to OFF. Times below one minute can be
specified in the range 0.1 to 59 seconds.
FX Step
The default step time recorded in a newly created effect step. It can be any value between 0
and 5 minutes 0 seconds, and is initially set to 0.50.1. Times below one minute can be
specified in the range 0.1 to 59 seconds.
FX Step In/Dwell/Out
The default In, Dwell, and Out times for a newly created effect step (three separate values).
They can be any value between 0 and 5 minutes 0 seconds, and are initially set to 0/OFF/0.
Times below one minute can be specified in the range 0.1 to 59 seconds.
FX Up/Down
The default up and down fade times for a newly created effect. The up and down times are
separate fields. They can be any value between 0 and 5 minutes 0 seconds, and are initially
set to 0.5/0.5. Times below one minute can be specified in the range 0.1 to 59 seconds.
file:///C|/LIGHTP/HELP.ENG/page18.htm (18 of 21)11/2/2004 3:02:40 AM