GeniusPro/Lightpalette Operator's Manual - Strand Lighting

Groups CL Mode QR
Key Sequence
[1] [THRU] [4] [@]GROUP] [3]
{INTS ONLY} [*]
[1] [THRU] [3] [@] [GROUP] [5]
{ATTS ONLY} [*]
Action
Sets channels 1 through 4 intensities
only to the levels set in group 3.
Sets channels 1 through 3 attributes
only to the levels set in group 5. This
command requires a Pentium
processor (or better) and the Tracker
software.
Editing Groups (Command Line Mode)
The following Command Line syntax examples are normally used with Lightpalette
[GROUP] [1] [*]
Key Sequence
[DELETE] [*]
[DELETE] [2] [*]
[DELETE] [1] [.] [1] [THRU]
[1] [.] [3] [*]
[GROUP] [2] [@] {COPYFROM}
[GROUP] [1] [*]
Action
Select group 1 for edit, create if
absent
Delete selected group
Delete group 2 if present
Delete groups 1.1, 1.2 and 1.3 if
present
Copy group 1 to group 2
Modifying Groups (Command Line Mode)
The following Command Line syntax examples are normally used with Lightpalette
Group channels are not changed.
Where the TEXT value is [omitted],
it is deleted from the group.
Key Sequence Action
file:///C|/LIGHTP/HELP.ENG/page64.htm (2 of 4)11/2/2004 3:03:34 AM