GeniusPro/Lightpalette Operator's Manual - Strand Lighting

Working with Channel Levels (Cont)
Press [BUMP MODE] to see the current setting. These appear in the centre LCD (consoles
with 3 LCD displays) or left LCD (consoles with 2 LCD displays) as labels above the soft keys,
or on the LCD of 300 Series consoles.
Press [BUMP MODE] again to return to normal operation.
The right three soft keys {KEYS ON}, {KEYS OFF}, {KEYS LATCH} determine the operation
of the submaster bump keys and have no effect on the {BUMP} softkey
The left three soft keys ({FLASH}, {SOLO}, {FLASH + SOLO}) determine what happens when
you press the {BUMP} soft key.A bar above the label shows the current mode. Pressing one of
these three soft keys changes the mode.
{FLASH}
Pressing {BUMP} sets the selected channels to the level set by the Flash Supermaster,
which is normally above the FLASH SUPER label in the centre LCD (consoles with 3
LCD displays) or on submaster 20 (consoles with 2 LCD displays). You can change the
Flash Supermaster to another fader or eliminate it altogether by changing the Function
properties of the submaster faders involved (refer to Submaster). If there is no Flash
Supermaster, the bump level is always 100%.
{SOLO}
Pressing {BUMP} does not effect the selected channels. All other (non-bumped)
channels, as well as effects, cues, and submasters are set to zero. The Flash
Supermaster is ignored.
{FLASH + SOLO}
Pressing {BUMP} sets the selected channels to the level set by the Flash Supermaster.
All other (non-bumped) channels, as well as effects, cues, and submasters, are set to
zero.
chans {BUMP} selects the listed channels and bumps their levels to the level of the
Flash Supermaster while you hold {BUMP}. Releasing {BUMP} restores the previous
levels. To bump the current selection, omit chan.{BUMP} is a soft key on the LCD Live
menu.
[1] [+] [2] {BUMP} All Modes
Selects channels 1 and 2 and bumps their levels.
{BUMP} All Modes
Leaves the existing selection unchanged but bumps its levels.
file:///C|/LIGHTP/HELP.ENG/page50.htm (10 of 11)11/2/2004 3:02:45 AM