GeniusPro/Lightpalette Operator's Manual - Strand Lighting

Groups (Direct Entry Mode)
Groups
Recording Groups (Direct Action Mode)
(Direct Action Mode)
The following Direct Action syntax examples are normally used with GeniusPro and are common to
Direct 1 Digit and Direct 2 Digit command modes
Key Sequence Action
[GROUP] [RECORD]
[GROUP] [1] [RECORD]
Records o/p to currently selected
group
Records o/p to group 1 from any
display
[GROUP] [1] [RECORD]
[GROUP] {INTS ONLY} [RECORD]
[GROUP] {ATTS ONLY} [RECORD]
Records selected edit group to group
1 from group preview display.
Records the current group with
intensity levels and erases attribute
levels.
Records the current group with
attribute levels and erases intensity
levels.
[1] [+] [2] [GROUP] [1] [RECORD] Records chans 1+2 in group 1.
[GROUP] [1] {INTS ONLY}
[RECORD]
[GROUP] [1] {ATTS ONLY}
[RECORD]
[GROUP] [1] [TEXT] hello
[RECORD]
[UNDO] [RECORD]
[SHIFT] [RECORD]
Records group 1 with intensity
channels only.
Records group 1 with attribute
channels only.
Records group 1 with text 'hello'.
Undo record command
= [UNDO] [RECORD]
Editing Groups (Direct Action Mode)
The following Direct Action syntax examples are normally used with GeniusPro and are common to
file:///C|/LIGHTP/HELP.ENG/page65.htm (1 of 3)11/2/2004 3:03:34 AM