GeniusPro/Lightpalette Operator's Manual - Strand Lighting

Effects (Command Line Mode)
[RECORD] [FX] [1] [.] [2] [@ATT]
[TIME] [3] [*]
[RECORD] [FX] [1] [.] [2] {LO/HI
LEVEL}[4] [0] [/] [8] [0] [*]
[UNDO] [RECORD]
[SHIFT] [RECORD]
Records FX 1 step 2 with attribute
fade in time of 3s
Records FX 1 step 2 with low level of
40% and high level of 80%.
Undo record command
= [REC-SUB]
Editing Effects (Command Line Mode)
The following Command Line syntax examples are normally used with Lightpalette
At Effects display:
Only edited at Fx sheet (with the
selection bar on an Fx number).
Key Sequence Action
[FX] [1] [.] [2] [*]
[DELETE] [*] [*]
[DELETE] [DELETE] [DELETE]
Select Fx 1 1st step [or step 2] for
edit, create step if absent
Delete selected step
[FX] [1] [.] [2] {DELETE} {DELETE} Deletes effect 1 step 2.
[FX] [1] [.] [2] [THRU] [3] [.] [4]
{DELETE} {DELETE}
{APPEND STEP}
[FX] [2] [@] {COPYFROM}
[FX] [1] [*]
Deletes effect 1 step 2 through effect
3 step 4.
Appends blank step after last step
Copy all steps from effect 1 to effect
2
[DELETE] [1] [.] [2] [*]
[DELETE] [1] [.] [1] [THRU]
[1] [.] [3] [*]
Delete step 1.2 if present
Delete steps 1.1, 1.2 and 1.3 if
present
[DELETE] [.] [4] [*]
Delete step 4 in current Fx
file:///C|/LIGHTP/HELP.ENG/page62.htm (2 of 9)11/2/2004 3:03:32 AM