GeniusPro/Lightpalette Operator's Manual - Strand Lighting

More documents

Recommendations

Info

Show Setup Screen The macro to run at the specified times. Can be OFF or any existing macro number from 0 to 2999. Top of Page file:///C|/LIGHTP/HELP.ENG/page22.htm (10 of 10)11/2/2004 3:02:30 AM
Recording Cues Recording Cues see also Running Cues X Playbacks This section describes how to set up and record the levels and properties of individual cues and cue parts. To show the Cue Sheet press the key. The following topics are covered: ● ● ● Cue and Part Numbering Recording Cue Levels Recording Cue Properties Cue and Part Numbering All cues, can comprise up to 12 parts numbered from 1 to 12. Each cue consists of a minimum of 1 part (e.g., Cue 1 Part 1, Cue 3.2 part 12, etc). If a part number is not specified using the {PART} softkey ([PART] hardkey on 300 Series consoles) when recording a cue, part 1 is automatically assumed. When a cue is run, all parts of the cue are run together. For the maximum number of cues, refer to Product Specification If you initially record whole number cues only, you can use a decimal cue number (for instance 3.5) to insert extra cues between whole numbers. You can insert decimal cues .1 through .9 between any two consecutively numbered cues. Entering a . 0 is optional in a cue number and is the same as if omitted (cue 1 is the same as cue 1.0). Examples of cues (in cue sheet order) are: 0.1 1 (first full numbered cue - same as 1.0). 1.1 1.3 2 100 999.9 (last possible cue). file:///C|/LIGHTP/HELP.ENG/page45.htm (1 of 22)11/2/2004 3:02:32 AM
Page 1 and 2:
GeniusPro/Lightpalette Operator's M
Page 3 and 4:
Page 5 and 6:
Page 7 and 8:
Page 9 and 10:
Page 11 and 12:
Page 13 and 14:
Front - Always display the channel
Page 15 and 16:
Front - Consoles that have no Grand
Page 17 and 18:
Front Additional software features
Page 19 and 20:
Front - PS/2 mouse support added fo
Page 21 and 22:
Front - On output when updating (wi
Page 23 and 24:
Front Brain slot 2 is labelled U44.
Page 25 and 26:
510i Show Controller The 510 i and
Page 27 and 28:
510i Show Controller Macro Display
Page 29 and 30:
510i Show Controller until the requ
Page 31 and 32:
510i Show Controller {+SS} Add one
Page 33 and 34:
510i Show Controller {SHUTDOWN} Dis
Page 35 and 36:
CommuniquePro2 CommuniquéPro (Cont
Page 37 and 38:
CommuniquePro2 Note: You can test t
Page 39 and 40:
CommuniquePro2 0xF8 (MIDI key type
Page 41 and 42:
CommuniquePro2 The following softke
Page 43 and 44:
CommuniquePro2 [CLR] Cancels time e
Page 45 and 46:
CommuniquePro2 enabled in Show Setu
Page 47 and 48:
CommuniquePro2 disabled, the prior
Page 49 and 50:
CommuniquéPro To set up External S
Page 51 and 52:
CommuniquéPro 1. Use the trackball
Page 53 and 54:
CommuniquéPro Tel: 818/598-0088 Fa
Page 55 and 56:
CommuniquéPro channels. The Notes
Page 57 and 58:
CommuniquéPro Bn 11 27 31 xx Reser
Page 59 and 60:
CommuniquéPro 71 AB_MAN_TIME 72 RA
Page 61 and 62:
CommuniquéPro 7F BLOCK KS-Key/KS-K
Page 63 and 64:
CommuniquéPro 07 DELETE_SHOW 08 PR
Page 65 and 66:
CommuniquéPro 15 PAUSE 16 EXIT_RES
Page 67 and 68:
CommuniquéPro Pressure/Pitch Bend:
Page 69 and 70:
CommuniquéPro CommuniquéPro also
Page 71 and 72:
Console Connectors www ● Sbus 1-4
Page 73 and 74: Console Connectors Pin 4 Remote inp
Page 75 and 76: Console Connectors Pin 3 Analog Blu
Page 77 and 78: Console Connectors Sub 25-36 macros
Page 79 and 80: Console Connectors Pin 1 Carrier De
Page 81 and 82: Console Connectors Pin 7 GND Pin 8
Page 83 and 84: Console Connectors Pin 5 Signal Gro
Page 85 and 86: Console Setup The Console Setup Scr
Page 87 and 88: Console Setup information refer to
Page 89 and 90: Console Setup For information on th
Page 91 and 92: Console Setup applied to compensate
Page 93 and 94: Networker Software the RJ-45 port (
Page 95 and 96: Networker Software # # Configures t
Page 97 and 98: Networker Software DMX PRIORITY ON
Page 99 and 100: Networker Software console_addr IP
Page 101 and 102: Networker Software Preserving Confi
Page 103 and 104: Networker Software Tracking Backup
Page 105 and 106: Networker Software on_line = 1 back
Page 107 and 108: Networker Software Sync Connect To
Page 109 and 110: Networker Software state being tran
Page 111 and 112: Networker Software Ensure that the
Page 113 and 114: Networker Software Supermasters sha
Page 115 and 116: Show Setup Screen Show Setup Screen
Page 117 and 118: Show Setup Screen recorded and run.
Page 119 and 120: Show Setup Screen Power Up Macro Se
Page 121 and 122: Show Setup Screen The Patch Window
Page 123: Show Setup Screen time, and stop da
Page 127 and 128: Recording Cues ● ● ● ● ●
Page 129 and 130: Recording Cues you the chance to ca
Page 131 and 132: Recording Cues down delay time is s
Page 133 and 134: Recording Cues cue [PROFILE] # [*]
Page 135 and 136: Recording Cues Deletes the fade pro
Page 137 and 138: Recording Cues loops, and subroutin
Page 139 and 140: Recording Cues 7, 8, 9, 6, 7, 8, 9,
Page 141 and 142: Recording Cues Move Fades (MF): - G
Page 143 and 144: Recording Cues [CUE] [2] [6] [*] [*
Page 145 and 146: Recording Cues Creates a new cue nu
Page 147 and 148: Running Cues Running Cues see also:
Page 149 and 150: Running Cues The Blackout Cue The f
Page 151 and 152: Running Cues Profile F # Start the
Page 153 and 154: Running Cues If there are any stopp
Page 155 and 156: Running Cues Changing Cue Direction
Page 157 and 158: Running Cues fade rate, or both. Wh
Page 159 and 160: Running Cues Note: The [UPDATE] com
Page 161 and 162: Running Cues thereby disrupting the
Page 163 and 164: Running Cues To go directly to a cu
Page 165 and 166: Running Cues Cue Preview Screen - S
Page 167 and 168: Running Cues Cue XRef Screen - Ligh
Page 169 and 170: Running Cues Creating a New Cue To
Page 171 and 172: Running Cues Renumbering changes th
Page 173 and 174: X Playbacks In multi-part cues, onl
Page 175 and 176:
X Playbacks This window is mainly u
Page 177 and 178:
X Playbacks The playbacks can be us
Page 179 and 180:
User Setup User Setup Screen This d
Page 181 and 182:
User Setup [1][@][4][.][5] sets cha
Page 183 and 184:
User Setup ■ ■ ■ ■ ■ ■
Page 185 and 186:
User Setup GEMINI: Row order, 10 ch
Page 187 and 188:
User Setup LP+ : Row order, 20 chan
Page 189 and 190:
User Setup GENIUS+ (GeniusPro Defau
Page 191 and 192:
User Setup PRESET: Shows the name o
Page 193 and 194:
User Setup Channel Formatting Contr
Page 195 and 196:
User Setup complete is shown to the
Page 197 and 198:
User Setup Undo Time The time for a
Page 199 and 200:
User Setup Mouse If a mouse is inst
Page 201 and 202:
User Setup Screen Locking the Conso
Page 203 and 204:
Groups ❍ Group 998.3 - *Partition
Page 205 and 206:
Groups Recording Group Levels [GROU
Page 207 and 208:
Groups Updates levels that have bee
Page 209 and 210:
Groups Group Screen - GeniusPro fil
Page 211 and 212:
Groups [UNDO] to cancel the command
Page 213 and 214:
Working with Channel Levels Working
Page 215 and 216:
Working with Channel Levels The lay
Page 217 and 218:
Working with Channel Levels ● cya
Page 219 and 220:
Working with Channel Levels ● ●
Page 221 and 222:
Working with Channel Levels Setting
Page 223 and 224:
Working with Channel Levels chans [
Page 225 and 226:
Working with Channel Levels file://
Page 227 and 228:
Working with Channel Levels (Cont)
Page 229 and 230:
Page 231 and 232:
Page 233 and 234:
Page 235 and 236:
Page 237 and 238:
Tracker Software Tracker Software T
Page 239 and 240:
Tracker Software Places channel 1 a
Page 241 and 242:
Tracker Software ● ● ● ●
Page 243 and 244:
Tracker Software The Rotary Control
Page 245 and 246:
Tracker Software Copying Channel At
Page 247 and 248:
Tracker Software The Copy Patch Men
Page 249 and 250:
Tracker Software [1] {MOVE PATCH} [
Page 251 and 252:
Tracker Software From the Patch Dis
Page 253 and 254:
Tracker Software For an attribute t
Page 255 and 256:
Tracker Software To edit the ATC Pa
Page 257 and 258:
Product Specification Product Speci
Page 259 and 260:
Product Specification ● Cue P/Bac
Page 261 and 262:
Product Specification ● Cues = 60
Page 263 and 264:
Product Specification ● Attribute
Page 265 and 266:
Product Specification *** The maxim
Page 267 and 268:
Basic Recording Basic Recording Cue
Page 269 and 270:
Basic Recording Note: When recordin
Page 271 and 272:
Basic Recording assigned time, omit
Page 273 and 274:
Basic Recording Note: The [REC TIME
Page 275 and 276:
Basic Recording You can record subm
Page 277 and 278:
Submasters numbering of the fader p
Page 279 and 280:
Submasters ❍ ❍ ❍ ❍ ❍ ❍
Page 281 and 282:
Submasters ● Text These propertie
Page 283 and 284:
Submasters submasters can be contro
Page 285 and 286:
Submasters [SUB] [1] [FX] [2] [*] (
Page 287 and 288:
Submasters the bump button is press
Page 289 and 290:
Submasters Updating Submasters from
Page 291 and 292:
Submasters The Submasters window in
Page 293 and 294:
Submasters The Submaster Screen To
Page 295 and 296:
Submasters OFF if no effect is asso
Page 297 and 298:
Submasters submaster 1 into page 3
Page 299 and 300:
Submasters Two-Scene Preset When se
Page 301 and 302:
General Introduction Introduction T
Page 303 and 304:
General Introduction Console Differ
Page 305 and 306:
General Introduction 520 Series Dif
Page 307 and 308:
General Introduction Conventions Us
Page 309 and 310:
General Introduction and for the pu
Page 311 and 312:
General Introduction and its suppli
Page 313 and 314:
Loading Software Loading Software Y
Page 315 and 316:
Loading Software stored in a safe p
Page 317 and 318:
Loading Software See also Installin
Page 319 and 320:
Networker for SN10X Software Instal
Page 321 and 322:
Page 323 and 324:
Page 325 and 326:
Additional Information hostname = a
Page 327 and 328:
Additional Information FIXTURE.BAK
Page 329 and 330:
Additional Information DOS Environm
Page 331 and 332:
Additional Information Russia: c:\d
Page 333 and 334:
PC Software Offline Editor & PC Sof
Page 335 and 336:
PC Software standard PC network. Th
Page 337 and 338:
PC Software rename the shortcut to
Page 339 and 340:
PC Software B Backup PC O Offline E
Page 341 and 342:
PC Software 5 500 Series B Backup P
Page 343 and 344:
PC Software pressing . 7. The Stran
Page 345 and 346:
PC Software you insufficient memory
Page 347 and 348:
PC Software Next N Last L Thru > Th
Page 349 and 350:
PC Software Exit Program crtl X P K
Page 351 and 352:
Showport File Conversion cd c:\show
Page 353 and 354:
Showport File Conversion $$LoopCoun
Page 355 and 356:
Showport File Conversion ● ●
Page 357 and 358:
Shownet Configuration Software 1. I
Page 359 and 360:
Shownet Configuration Software Cut
Page 361 and 362:
Shownet Configuration Software Down
Page 363 and 364:
Server Software place. 3. Insert a
Page 365 and 366:
Server Software O Offline Editor F
Page 367 and 368:
Server Software Admin is like any o
Page 369 and 370:
Server Software To set up a new con
Page 371 and 372:
Server Software User Setup changes
Page 373 and 374:
Macros Pre-Assigned Macros There ar
Page 375 and 376:
Macros Deleting a Macro Macros can
Page 377 and 378:
Macros You can view and edit macros
Page 379 and 380:
Macros This adds the keystrokes int
Page 381 and 382:
Macros file:///C|/LIGHTP/HELP.ENG/p
Page 383 and 384:
R120 Handheld Remote ❍ Operating
Page 385 and 386:
R120 Handheld Remote [9][THRU][1][2
Page 387 and 388:
R130 Handheld Remote R130 Handheld
Page 389 and 390:
R130 Handheld Remote Installing the
Page 391 and 392:
Designer Remote Designer's Remote T
Page 393 and 394:
Designer Remote Updates channel 1 a
Page 395 and 396:
Archive Screen Whole Show: This inc
Page 397 and 398:
Archive Screen The following show l
Page 399 and 400:
Archive Screen {SAVE PASSWORD} Allo
Page 401 and 402:
Archive Screen Why Save the Show? I
Page 403 and 404:
Archive Screen console on again. If
Page 405 and 406:
Archive Screen 8. Press {LOAD BACKU
Page 407 and 408:
Archive Screen 2. Switch to the dri
Page 409 and 410:
Archive Screen To select a field, u
Page 411 and 412:
Archive Screen 3. Use the Wheel to
Page 413 and 414:
Report Displays Report Displays Ent
Page 415 and 416:
Report Displays Last Move The last
Page 417 and 418:
Report Displays (c) Blank Parts Rec
Page 419 and 420:
Report Displays Output Shows the sp
Page 421 and 422:
Report Displays This screen is disp
Page 423 and 424:
Report Displays The Access Rights S
Page 425 and 426:
Report Displays and provide no user
Page 427 and 428:
Report Displays The Internal Diagno
Page 429 and 430:
Report Displays Note: If you have a
Page 431 and 432:
Console Reporter Console Reporter C
Page 433 and 434:
Console Reporter line. (Refer to Di
Page 435 and 436:
Console Reporter The log shows the
Page 437 and 438:
Console Reporter Note: Alternativel
Page 439 and 440:
Direct Output Control Direct Output
Page 441 and 442:
Direct Output Control by the Output
Page 443 and 444:
Common Features Common Features The
Page 445 and 446:
Common Features Live Screen Format
Page 447 and 448:
Common Features Effects / Channel L
Page 449 and 450:
Common Features [DISABLE] keylock s
Page 451 and 452:
Profiles Profiles Profiles let you
Page 453 and 454:
Profiles The title bar shows the da
Page 455 and 456:
Profiles Each end point, and any po
Page 457 and 458:
Profiles more points. Each end poin
Page 459 and 460:
Profiles [PB] [2] [PROFILE] [PROFIL
Page 461 and 462:
Patches ● ● ● ● ● ● ●
Page 463 and 464:
Patches Refer to Patching Channel I
Page 465 and 466:
Patches Attributes) # N (magenta) T
Page 467 and 468:
Patches the same or another output,
Page 469 and 470:
Patches Copying Patch Information P
Page 471 and 472:
Patches command. Press [*] again. [
Page 473 and 474:
Patches Note: Submasters and effect
Page 475 and 476:
Patches [1] [THRU] [2] [0] [4] [8]
Page 477 and 478:
Patches Since profiles set here are
Page 479 and 480:
Patches [1] {@NON} [5] {@NON} [*] A
Page 481 and 482:
Handheld Remotes Handheld Remotes C
Page 483 and 484:
Effects [FX] # [.] # selects the sp
Page 485 and 486:
Effects [FX] # [TEXT] text [*] chan
Page 487 and 488:
Effects When the effect is run or s
Page 489 and 490:
Effects [FX] [1] {LEVEL} [NORMAL] [
Page 491 and 492:
Effects [FX] [1] {STOP AFTER}[TIME]
Page 493 and 494:
Effects Step Time The step time con
Page 495 and 496:
Effects High Scaling sets the perce
Page 497 and 498:
Effects The Live Screen - Effects W
Page 499 and 500:
Effects yellow The playback is runn
Page 501 and 502:
Effects [FX LOAD] [FX] [PB] #[*] (C
Page 503 and 504:
Effects [FX GO] starts the current
Page 505 and 506:
Effects Updating Effects The effect
Page 507 and 508:
Effects ❍ ❍ ❍ ❍ ❍ ❍ ❍
Page 509 and 510:
Effects The Effects Screen - Lightp
Page 511 and 512:
Effects Next Fx The next effect to
Page 513 and 514:
Effects Changes effect 1 up fade ti
Page 515 and 516:
Effects Using recording commands wh
Page 517 and 518:
Automod [8] {A-MOD FROM} [3] [@] [8
Page 519 and 520:
Automod Using Automod with Moving L
Page 521 and 522:
Key, Wheel VDU Remapping Remapping
Page 523 and 524:
Key, Wheel VDU Remapping Notes 1. O
Page 525 and 526:
Key, Wheel VDU Remapping Function K
Page 527 and 528:
Key, Wheel VDU Remapping The follow
Page 529 and 530:
Key, Wheel VDU Remapping Top of Pag
Page 531 and 532:
Contents ❍ ❍ ❍ ❍ ❍ ❍ SN
Page 533 and 534:
Table Of Contents Common Features
Page 535 and 536:
Table Of Contents ● ● ● ●
Page 537 and 538:
Page 539 and 540:
Page 541 and 542:
Page 543 and 544:
Table Of Contents ❍ ❍ ■ Conso
Page 545 and 546:
Table Of Contents ● Viewing and E
Page 547 and 548:
Table Of Contents ❍ ■ Installin
Page 549 and 550:
Table Of Contents ❍ ❍ ❍ ❍
Page 551 and 552:
Table Of Contents Server Software
Page 553 and 554:
Table Of Contents ● Showport File
Page 555 and 556:
Notes changes made when you install
Page 557 and 558:
SN100 and SN102 Network Nodes SN100
Page 559 and 560:
SN100 and SN102 Network Nodes SN102
Page 561 and 562:
SN100 and SN102 Network Nodes Servi
Page 563 and 564:
SN100 and SN102 Network Nodes 5 GND
Page 565 and 566:
SN100 and SN102 Network Nodes 14 12
Page 567 and 568:
Ethernet Overview Thick Net This us
Page 569 and 570:
Ethernet Overview A typical configu
Page 571 and 572:
Ethernet Overview ❍ ❍ ❍ Ether
Page 573 and 574:
Ethernet Overview Ethernet Card Ins
Page 575 and 576:
Tutorial The More Key The [MORE] ke
Page 577 and 578:
SN103 and SN104 Network Nodes I/F N
Page 579 and 580:
Index Index A B C D E F G H I J K L
Page 581 and 582:
Index Channel Check Channel Control
Page 583 and 584:
Index Cue Sheet Macros (Show Setup
Page 585 and 586:
Index Effect Fade Times Effect Leve
Page 587 and 588:
Index The Internal Diagnostic Scree
Page 589 and 590:
Index Network Video (Networker) Net
Page 591 and 592:
Index Recording Effect Properties R
Page 593 and 594:
Index Setting Up an External Submas
Page 595 and 596:
Index Tracking Backup Status (Netwo
Page 597 and 598:
Index X Playback Order (User Setup
Page 599 and 600:
QR Index ● ● ● ● ● ● Ch
Page 601 and 602:
QR Index Profiles ● ● ● Recor
Page 603 and 604:
QR Index SMPTE Time Code Events ●
Page 605 and 606:
Common Commands QR Effect and Funct
Page 607 and 608:
Common Commands QR Playback Control
Page 609 and 610:
Common Commands QR IntChan AttChan
Page 611 and 612:
Common Commands QR [FX] [SHIFT NEXT
Page 613 and 614:
Common Commands QR Selects attribut
Page 615 and 616:
Common Commands QR Channel Summary
Page 617 and 618:
Common Commands QR {FORWARD} {LINKS
Page 619 and 620:
Common Commands QR {EVENT LIST} {
Page 621 and 622:
Common Commands QR - - - {LOAD BACK
Page 623 and 624:
Events & Console Reporter QR Events
Page 625 and 626:
Events & Console Reporter QR [SHIFT
Page 627 and 628:
Events & Console Reporter QR [TIME]
Page 629 and 630:
Events & Console Reporter QR [REPOR
Page 631 and 632:
Patching QR [1][@ATT][2][@ATT][1][0
Page 633 and 634:
Patching QR {SET} {COPY/SWAP}[1] {C
Page 635 and 636:
Patching QR Key Sequence Action {C
Page 637 and 638:
Channel levels, attributes and Dimm
Page 639 and 640:
Page 641 and 642:
Page 643 and 644:
Page 645 and 646:
Page 647 and 648:
Page 649 and 650:
Page 651 and 652:
Page 653 and 654:
Page 655 and 656:
Cues & X Playbacks QR [1] [+] [2] [
Page 657 and 658:
Cues & X Playbacks QR [RECORD] [CUE
Page 659 and 660:
Cues & X Playbacks QR [CUE] [1] [WA
Page 661 and 662:
Cues & X Playbacks QR [RATE] key 3r
Page 663 and 664:
Cues and X Playbacks (Direct Entry
Page 665 and 666:
Page 667 and 668:
Page 669 and 670:
Page 671 and 672:
Page 673 and 674:
Effects (Command Line Mode) Effects
Page 675 and 676:
Effects (Command Line Mode) Modifyi
Page 677 and 678:
Effects (Command Line Mode) [FX] [1
Page 679 and 680:
Effects (Command Line Mode) [FX DIR
Page 681 and 682:
Effects (Command Line Mode) [FX LOA
Page 683 and 684:
Effects (Direct Entry Mode) Editing
Page 685 and 686:
Effects (Direct Entry Mode) [FX] [1
Page 687 and 688:
Effects (Direct Entry Mode) [FXGO]
Page 689 and 690:
Effects (Direct Entry Mode) Updatin
Page 691 and 692:
Groups CL Mode QR Key Sequence [1]
Page 693 and 694:
Groups CL Mode QR [1] [THRU] [5] [@
Page 695 and 696:
Groups (Direct Entry Mode) Direct 1
Page 697 and 698:
Profiles + Macros QR Profiles and M
Page 699 and 700:
Profiles + Macros QR {DELETE POINT}
Page 701 and 702:
Profiles + Macros QR [MACRO] [MACRO
Page 703 and 704:
Submasters (Command Line Mode) [REC
Page 705 and 706:
Submasters (Command Line Mode) [*]
Page 707 and 708:
Submasters (Command Line Mode) [UPD
Page 709 and 710:
Submasters DE Mode QR Submasters (D
Page 711 and 712:
Submasters DE Mode QR Only edited a
Page 713 and 714:
Submasters DE Mode QR [SUB] [1] {SU
Page 715 and 716:
Submasters DE Mode QR [SUB] [7] [*]
Page 717 and 718:
510i QR 510i and 310 Show Controlle
Page 719 and 720:
510i QR [SELECT] [SHIFT] {LAST 4} [
Page 721 and 722:
510i QR {CONTR DOWN} {CONTR UP} {BA
Page 723 and 724:
Setup QR CC Auto Hold Mode On Off O
Page 725 and 726:
Setup QR X Playback Colours X Playb
Page 727 and 728:
Setup QR High 20 x 20 grid - A4 20
Page 729 and 730:
Setup QR Auto Preheat Off, On Autom
Page 731 and 732:
Setup QR On Mode = Sub bumped to ve
Page 733 and 734:
Setup QR Trig Macro 1..1999 Number
Page 735 and 736:
Setup QR Off No Handheld Handheld R
Page 737 and 738:
Setup QR file:///C|/LIGHTP/HELP.ENG
Page 739 and 740:
Glossary of Terms Auto Channel Pagi
Page 741 and 742:
Glossary of Terms Console Reporter
Page 743 and 744:
Glossary of Terms Direct 2 Digit A
Page 745 and 746:
Glossary of Terms Flash Softkey Fla
Page 747 and 748:
Glossary of Terms Multiplex Non-dim
Page 749:
Glossary of Terms Sub Submaster Sup
show all

GeniusPro/Lightpalette Operator's Manual - Strand Lighting

Create successful ePaper yourself

Delete template?

Save as template?