GeniusPro/Lightpalette Operator's Manual - Strand Lighting

Cues and X Playbacks (Direct Entry Mode)
[CUE] [9] {LINK} [CUE] [1]
[RECORD]
[CUE] [9] {LINK} [CUE] [.]
[RECORD]
Records cue 9 linked to cue 1
Records cue 9 return from link.
[CUE] [1] [0] {LOOP} [2] [RECORD] Records cue 1 with loop count of 2
[CUE] [1] [PB] [2] [RECORD] Records cue 1 assigned to playback 2.
[CUE] [1] [FX] [+] [4] [RECORD] Records cue 1 to start effect 4.
[CUE] [1] [FX] [-] [4] [RECORD] Records cue 1 to stop effect 4.
[CUE] [1] [MACRO] [6] [RECORD] Records cue 1 to run macro 6.
[CUE] [1] [TEXT] hello [RECORD]
[CUE] [1] [PROFILE] [6] [RECORD]
[CUE] [1] [PROFILE] [6] [/] [7]
[RECORD]
[CUE] [1] [PB] [2] [RECORD]
[CUE] [1] [PB] [RECORD]
Records cue 1 with text hello
Records cue 1 using profile 6 on up &
down fades
Records cue 1 using profile 6 on up fades
and profile 7 on down fades.
Records levels into cue 1 and assigns it
to Playback 2.
Records levels into cue 1 and deletes any
assignment.
[UNDO] [RECORD]
[SHIFT] [RECORD]
Undo record command
= [REC-SUB]
Summary
[CUE] [1] [PART 2] [record_option]
[TIME [3] [/] [4] [DELAY] [5] [/] [6]
[WAIT] [7] [RECORD]
record options: One of these per
command (all may be used in
successive commands):
BLOCK CUE, MOVE FADE,
CROSS FADE, ALL FADE
PLAYBACK [n], MACRO [n], FX
[-] [n], LINK [n], LOOP [n]
Editing Cues (Direct Action Mode)
file:///C|/LIGHTP/HELP.ENG/page61.htm (3 of 10)11/2/2004 3:03:32 AM