GeniusPro/Lightpalette Operator's Manual - Strand Lighting

Running Cues
thereby disrupting the remainder of the cue flow.
[CUE] [+] # wheel fades the specified cue on. Levels are combined on a highest takes precedence
basis with cue and effects playbacks and submasters. Channel levels increase as you move the Level
Wheel up (away from you).
[CUE] [-] # wheel fades all channels from the specified cue off. Channel levels decrease as you move
the Level Wheel up (away from you).
Viewing and Editing Cues
Once you have recorded cues, you can view and edit them in the Preview display. You can also use
the Preview display to create new cues.
Note: Changing levels while in this display changes the recorded levels in the current cue without a
record command and without warning you.
The Preview Display
To show the Preview display press in the Display keypad.
The Preview display Levels screen shows the recorded channel levels (intensity levels and attribute
levels) of the current cue. The Levels screen background is grey rather than black to show that levels
changed in this display are not being changed live. To change output levels you must be in the Live
display.
The Preview display State screen shows the recorded cues. The current cue is shown in the CUE field
on the right LCD, and also has a cursor (>) next to it in the Preview display State screen.
To move between cues, use [NEXT] and [LAST] or the Up or Down keys over the X playback. The
cursor (>) follows the current cue
Cue Sheet Mode
file:///C|/LIGHTP/HELP.ENG/page7.htm (15 of 25)11/2/2004 3:02:36 AM