GeniusPro/Lightpalette Operator's Manual - Strand Lighting

Patches
unchanged.
[1] [@] [5] [.] [2] [*] All Modes
[1] [@ATT] [5] [*] All Modes
Patches output 1 to channel 5 attribute 2 (colour).
out [@] # [.] [2] [@] or out [@ATT] # [@] patches the output with the default maximum frame
to the channel attribute.
[1] [@] [5] [.] [2] [@] [*] All Modes
[1] [@ATT] [5] [@ATT] [*] All Modes
Patches output 1 with the default maximum frame to channel 5 colour attribute.
out [@] # [.] [2] [@] # or out [@ATT] # [@ATT] patches the output with the specified
maximum frame to the channel attribute.
[1] [@] [5] [.] [2] [@] [2] [0] [*] All Modes
[1] [@ATT] [5] [@ATT] [2] [0] [*] All Modes
Patches output 1 with a maximum frame of 20 to the channel 5 colour attribute.
out [@ATT] [@ATT] sets the default maximum frame for the output without changing the
existing patch.
[1] [THRU] [5] [@ATT] [@ATT] [*] All Modes
Changes outputs 1 to 5 to use the default maximum frame.
out [@ATT] [@ATT] # sets the channel attribute to the specified maximum frame without
changing the existing patch.
[1] [@ATT] [@ATT] [2] [0] [*] All Modes
Sets channel 1 attribute to a maximum frame of 20.
Patching Non-Dims
You can patch an output to a channel, set the output as a non-dim, and set its threshold. If you
omit the threshold, the default threshold from the Default Non-Dim % field in the Show Setup
Screen is used. You can patch outputs as non-dims to intensity channels with a single
command, but it requires two commands to patch an output as a non-dim to an attribute
channel.{@NON} is a soft key on the LCD Patch menu. out {@NON} # [*] patches the output
as a non-dim to the selected channel. It sets the threshold to the default if the output is not a
non-dim, or leaves the threshold alone if the output is already a non-dim.
[1] {@NON} [5] [*] All Modes
Patches output 1 as a non-dim to channel 5 intensity.
out {@NON} # {@NON} patches the output as a non-dim to the selected channel
intensity and sets the threshold to the default threshold.
file:///C|/LIGHTP/HELP.ENG/page9.htm (19 of 21)11/2/2004 3:03:09 AM