GeniusPro/Lightpalette Operator's Manual - Strand Lighting

User Setup
Mouse
If a mouse is installed, the NET NODE and PORT field must be set. The NET NODE may be
set to LOCAL (Default) or the Net Node Name. The PORT field can be set to OFF (default)
COM1 or COM2. The software also supports a PS2 mouse.
Console Keys Layout
Sets the keyboard layout for the console. Some keys have been moved, and the Q-Only/Track
key added to the Record Keypad since the original version of the console. You can disable the
Q-Only/Track key by setting this field to NO Q_ONLY KEY. Forinformation on the function of
the Q-Only/Tracking key, refer to Level Tracking
Its value is Q_ONLY KEY (default) or NO Q_ONLY KEY.
Submaster Layout
'Submaster Layout' is used when a 530/520 logs into a 550 console (or a console with 54
submasters set via the environment variable 220NUMSUBS). It allows the 530/520 to have its
submasters appear as 1..24 or as 25..48. This allows 2 remote consoles to have their 'own'
range of submasters.
GENIUSPRO/PALETTE
Determines whether default settings in the Setup display will be determined by your password,
or will be default GeniusPro or Lightpalette settings. Changing this setting changes the settings
immediately.
DEFAULT The defaults in the Setup display are determined by your password (whether you
bought GeniusPro or Lightpalette operating software).
LIGHT PALETTE The defaults in the Setup display are changed to Lightpalette settings.
GENIUSPRO The defaults in the Setup display are changed to GeniusPro settings.
Top of Page
file:///C|/LIGHTP/HELP.ENG/page18.htm (21 of 21)11/2/2004 3:02:40 AM