GeniusPro/Lightpalette Operator's Manual - Strand Lighting

Glossary of Terms
Link
A jump to a named cue in the cue sheet instead of to the next numerical
cue. Links can be set using [CUE] #{LINK}#, or by activating the edit field by
holding down the [SHIFT] key and moving the rollball to the Link field then
using the wheel to set the link. The link field can also be set to Rtrn to terminate
the link chain. This will force an end to the cue sheet and will not start any more
cues until you explicitly reload it. See also Link
Live Output is active and shown on stage.
Live Editing
The process of editing the lighting levels as they appear on stage.
Live Patch
Live recording
Logins
Loop
LTP
The process of recording submasters, cues, effects, or groups from lighting levels
as they appear on stage.
If the Login display is enabled in the 220node.cfg file, the user requires to enter a
user name (Up to 8 alpha-numeric characters) and password to obtain access to
the console or remote within a network. The ADMIN user can set access rights
for each user and for each console, or remote on a network. See also Access
Rights.
Specifies how many times a link is executed from 1 to 255 times. A value of 0 is
indefinitely. Up to 4 loops can be nested within each other.
Lowest takes precedence. If more than one source of control affects a channel, the
channel level is set to the one which is the last to take control. See also HTP.
Macro
A recorded sequence of key presses which can be played back.
Memory Lock
MF
MIDI
Monitor
Memory Lock prevents recorded data from being altered but does not stop normal
control or playback.
See Move Fade
Musical Instrument Digital Interface. An electrical and communications standard.
See also MSC.
A computer display device. A console can have one to four monitors, which are
connected to, but separate from, the console. See also screen.
Move Fade (MF)
MSC
A cue which fades some channels to the given levels. Other channels are left
unchanged. Abbreviated as MF. See also Cross Fade, All Fade and Cue. This is
the default fade type for GeniusPro when Cue Tracking is set to ON
Midi Show Control. A way of controlling a show via the MIDI input.
file:///C|/LIGHTP/HELP.ENG/page20.htm (9 of 12)11/2/2004 3:03:40 AM