GeniusPro/Lightpalette Operator's Manual - Strand Lighting

User Setup
Wheel Mastering
Controls the way that the Level Wheel masters channels.
Its value can be SHAFT (GeniusPro Default) or PROPORTIONAL (Lightpalette Default)
SHAFT When you move the Level Wheel, the selected levels move up or down by the same
amount. For example, with two channels at 10% and 40%, wheeling by 10% will increase
these to 20% and 50% respectively.
PROPORTION Each channel with a level moves up or down by an amount proportional to its
level. For example, with two channels at 10% and 40%, wheeling by 50% will increase these to
15% and 60%; that is, each level is increased by half as much again. Channels in the selection
that are set to zero move up 2% with a 50% increase in other channel levels.
Wheel Sensitivity
Controls the sensitivity of the Level Wheel
The value can be SLOW, MEDIUM (default), or FAST.
Stop Key
Controls the function of the [STOP] key at the top of the console.
OFF (default) The key is disabled.
BLACKOUT Sets all intensities to 0% at the first press and restores them at the second press.
Attributes are unaffected.
STOP ATTS Stops all attribute fades while intensity fades continue. Pressing it again reenables
attribute fades when the next cue or effect is run or Channel Control action is taken.
Display Options Window
The Display Options window is in the User Setup display, and lets you see how level and state
information appear in the various displays..
The fields within the Display Options Window are desribed as follows:
■ Display Language
■ Channel Display
■ Smart Channel Display
■ Auto Channel Page
file:///C|/LIGHTP/HELP.ENG/page18.htm (4 of 21)11/2/2004 3:02:40 AM