GeniusPro/Lightpalette Operator's Manual - Strand Lighting

Submasters
The Submasters window in the Live display shows the current state of the submasters and is used to
show submaster fader status. If the State screen does not show the Submasters window, go to the
User Setup Screen and change the Live Screen Layout value to PB+SUBS or SUBS. Then press
[LIVE] to show the Live display.
Current Page The current submaster page is shown on the title bar of the Submasters window
Submaster Number Each submaster is identified by its number (1 to 24, 1 to 30, 1 to 54, or 1 to 120
depending on the console). The colour of this number shows the state of the submaster:
blue The submaster has no recorded channels and so has no effect on the console
output.
white The submaster has recorded channels but is not contributing to the output.
yellow The submaster has recorded channels and is contributing to the output.
green background The submaster fader is adding channels from a submaster on a
different page than the current page. This happens if the fader is set higher than 0 when
the current page is changed (or less than 10 for an inhibitive submaster). The green
background disappears when the submaster reloads.
file:///C|/LIGHTP/HELP.ENG/page24.htm (16 of 25)11/2/2004 3:02:50 AM