GeniusPro/Lightpalette Operator's Manual - Strand Lighting

Cues & X Playbacks QR
[RECORD] [CUE] [1] [PB] [2] [*]
[RECORD] [CUE] [1] [PB] [*]
[RECORD] [CUE] [1] [@ATT]
[PROFILE] [6] [*]
[UNDO] [RECORD]
[SHIFT] [RECORD]
Records levels into cue 1 and
assigns it to Playback 2.
Records levels into cue 1 and deletes
any assignment.
Records cue 1 using profile 6 on
attribute fades.
Undo record command
= [REC-SUB]
[RECORD] [CUE] [1] [PART 2]
[record_option] [TIME [3 [/ 4]]
[DELAY [5 [/ 6] [WAIT [7] [*]
Summary
[record option]: One of these per
command (all may be used in
successive commands):
HARD BLOCK or SOFTBLOCK or
ALL FADE or TRACK THRU or
PLAYBACK [n] or MACRO [n] or FX
[+] [n] or FX [-] [n] or LINK [n] or
LOOP [n]
Editing Cues (Command Line Mode)
The following Command Line syntax examples are normally used with Lightpalette
Key Sequence Action
Changes fields in Preview displays
from Yellow (non-editable) to Green
(editable), enabling fields to be
[SHIFT] Trackball movement
selected using the rollball (or mouse)
and the level wheel, [+] or [-] keys or
numeric keypad to set field values.
Returns fields in the Cue Preview
[*]
displays to the non-editable mode
(Yellow)
Select cue 2 for edit, create if absent
[CUE] [2] [*] [*]
& copy levels from preceding cue (At
cue preview edit display only)
file:///C|/LIGHTP/HELP.ENG/page60.htm (4 of 9)11/2/2004 3:03:31 AM