GeniusPro/Lightpalette Operator's Manual - Strand Lighting

Profiles + Macros QR
{DELETE POINT}
[PROFILE] [1] [RECORD]
[UNDO] [RECORD]
[SHIFT] [RECORD]
{END EDIT}
Delete the nearest point to the track ball/
mouse cursor
Records profile 1 using current profile
points
Undo record command
= [UNDO] [RECORD]
End graph-editing the selected profile
Profile Learn
Key Sequence Action
[PB] [PROFILE] [5] [PB] [1]
{LEARN} [*]
[PB] {PROFILE] [6] [/] [7] [PB] [2]
{LEARN} [*]
[PB] {PROFILE] [/] [3] [PB] [1]
{LEARN} [*]
Learns intensity and attribute profiles on
X Playback 1 (All Modes) . Where 5 is
the Upfade profile and attribute fade, and
5 + 1 is the Downfade
profile.
Learns intensity profiles on X Playback 2
(All Modes). Where 6 is the Upfade
profile, 7 is the Downfade and the
attribute fade is not affected.
Learns intensity profile on X Playback 1
(All Modes). Where 3 is the Downfade
profile and the Upfade and attribute
profiles are unaffected.
Note: If Playbacks field in the Show Setup Screen is set to Single, or Split Single and
Playback 2 is selected. An error message is generated.
Creating Macros (All Modes)
The following commands are common to Command Line and Direct Action modes for
GeniusPro and Lightpalette.
Key Sequence
file:///C|/LIGHTP/HELP.ENG/page68.htm (3 of 5)11/2/2004 3:03:35 AM