GeniusPro/Lightpalette Operator's Manual - Strand Lighting

Common Commands QR
[REPORT] {ADV SETUP}
{ACCESS RIGHTS}
Displays Access Rights Screen
Select fields using trackball
Use level wheel or [+] or [-] keys to set
field value to YES or NO
Next/Last Commands
The following commands are common to Command Line and Direct Action modes for
GeniusPro and Lightpalette.
Descriptions of NEXT apply equally to
LAST
Key Sequence Action
If channel selection:
[NEXT]
If dimmer selection:
[NEXT]
[1] [NEXT]
(2 is displayed)
[CUE] [NEXT]
(next existing CUE is displayed
[SUB[ [NEXT[
(next existing SUB is displayed)
[FX[ [NEXT[
(next existing FX step is displayed)
[GROUP] [NEXT]
(next existing GROUP is displayed)
[1] {@FIXTURE} [NEXT]
(next existing fixture is displayed)
[MACRO] [NEXT]
(next existing MACRO is displayed)
Restores each channel level, selects the
next channel following each selected
channel, and sets the level to the one just
restored over
Unpatches next dimmer, sets to 100%,
repatches current dimmer
Selects channel 2 (or next available
channel) on command line
Selects the next existing item
Selects the next existing item
Selects the next existing item
Selects the next existing item
Selects the next existing item
Selects the next existing item
file:///C|/LIGHTP/HELP.ENG/page54.htm (7 of 19)11/2/2004 3:03:26 AM