GeniusPro/Lightpalette Operator's Manual - Strand Lighting

Effects
[FX] [1] {STOP AFTER}[TIME] [1] [2] [*]
Sets FX 1 to stop after 12 seconds
[FX] [1] {STOP AFTER} [SUB] [*]
Sets FX 1 to stop when the submaster fader it is attached to is brought to 0%
[FX] [1] {STOP AFTER} [.] [*]
Sets FX 1 to stop when the last step is run after the FXSTOP key is pressed
Step Control
The Step Control determines how the console knows when to take the next effect step. This property
can only be changed from the Effects display, and is initially set to TIMED.
TIMED
The effect playback takes stepping cues from the timer, which uses the Step Time settings for each
step.
MANUAL
The effect playback takes stepping cues from the [FX STEP] button.
MIDI
The effect playback takes stepping cues from the MIDI input. This option requires the CommuniquéPro
software. Refer to CommuniquéPro Software for more information.
AUDIO (500 Series Consoles only)
The effect playback takes stepping cues from the base track of the Audio input. This option requires
the CommuniquéPro software. Refer to CommuniquéPro Software for more information.
This field can be set in edit mode using the trackball to select the field and the level wheel or [+] or [-]
keys to select the option. Alternatively, the field can be set using the command line as shown in the
following examples:
[FX] [1] {STEP CTR} {TIMED} [*]
Sets FX 1 step control to Timed
[FX] [1] {STEP CTR} {MANUAL} [*]
Sets FX 1 step control to Manual
[FX] [1] {STEP CTR} {MIDI} [*]
Sets FX 1 step control to MIDI
file:///C|/LIGHTP/HELP.ENG/page35.htm (10 of 34)11/2/2004 3:03:13 AM