GeniusPro/Lightpalette Operator's Manual - Strand Lighting

Submasters (Command Line Mode)
[1] [THRU] [5] [UPDATE] [SUB]
[1] [*]
Changes channel 1 through 5 levels
in submaster 1, excluding channels
that are not already in the
submaster. If the submaster fader is
not at 0 then the updated levels are
adjusted to avoid output bumps. For
example, if the submaster fader is
at 50% and a channel level of 10%
(from the output) is updated to it,
the level recorded into the
submaster is actually 20% so that
the submaster output is 10%. The
maximum level that can be
recorded into the submaster is
100% so output bumps can still
occur with a low fader and high
levels.
Gang Loading of Submasters (Command Line Mode)
Key Sequence
[CUE] [1] [THRU] [1] [2] Sub Bump
Button 1
[FX] [1] [THRU] [3] Sub Bump
Button 13
[GROUP] [1] [THRU] [6] Sub Bump
Button 19
Action
Loads cues 1 through 12 in Subs 1
through 12
Loads effects 1 through 3 in Subs 13
through 16
Loads groups 1 through 6 in Subs 19
through 24
file:///C|/LIGHTP/HELP.ENG/page66.htm (7 of 7)11/2/2004 3:03:35 AM