GeniusPro/Lightpalette Operator's Manual - Strand Lighting

Networker Software
# File server IP address: (user-edited)
# 0.0.0.0. means file server not used
# Used by consoles and PCs to locate the file server
file_server_addr = 192.168.11.215
# IP address of main console to connect to: (user-edited)
# Used by backup and remote consoles to locate the main console
console_addr = 192.168.11.20
# Disable or enable the login display: (user-edited)
# The Server application needs to be installed for this to work
# 0 (disable) or 1 (enable)
login_display = 1
# Disable or enable console outputs: (user - and system-edited)
# Offline means all local and network DMX and handhelds are off
# 0 (offline) or 1 (online)
on_line = 1
# Define how this node starts up: (user- and system-edited)
# 0 (remoete) or 1 (backup) or 2 (main console)
backup_mode = 2
# Defines how CLR & SHIFT CLR operate (user-edited)
# 0 (clr deletes single key, shift clr deletes whole command line)
# 1 (clr deletes whole command line, shift clr deletes single key)
clr_mode = 0
# Numberof show to load at start up: (iser- and system - edited)
# 0 (current show) or 1 -> 5 (listed in .usr file)
user_show = 0
# Name of last logged in user: (user- and system-edited)
# up to 8 characters, no spaces
user_name =
# Password of last logged in user: (user- and sytstem-edited)
user_pw =
#
# End of File
#
file:///C|/LIGHTP/HELP.ENG/page15.htm (5 of 23)11/2/2004 3:02:29 AM