GeniusPro/Lightpalette Operator's Manual - Strand Lighting

Submasters
Updating Submasters from the Live Screen
When in the Submaster Screen, you can update the current submaster in accordance with levels in the
Live Screen using the syntax chans [@] [LIVE]
[1] [THRU] [5] [@] [LIVE] Direct Action Modes
[1] [THRU] [5] [@] [LIVE] [*] Command Line Mode
Updates channels 1 to 5 inthe currently selected submaster in the Submaster Screen according to the
levels in the Live Screen. If any of the channels are not already in the submaster, they are added tothe
submaster
Alternatively, you can update the value of only the channels already in the submaster screen in
accordance with the levels in the Live Screen using the syntax [SUB] [@] [LIVE}
[SUB] [1] [@] [LIVE] Direct Action Modes
[SUB] [1] [@] [LIVE] [*] Command Line Mode
Selects the channels in submaster 1 and updates them to the values in the Live Screen.
Quick Recording
Pressing the bump button for a submaster (this is below the submaster fader) is a quick way of
recording a submaster. This does not actually bump the submaster.
[SUB] Sub 1 button Records submaster 1. This is the same as [SUB] [1] [RECORD]
chan, [SUB] Sub 1 button Adds the specified channels to the submaster and sets their levels to
match the current Levels screen.
[1] [THRU] [5] Sub 1 button (All Modes)
Adds channels 1 through 5 to submaster 1 and sets their levels to the levels on the
current Levels screen. If the channels are already in the submaster the levels are
changed to match the current Levels screen.
chan [SUB] [-] Sub 1 button Deletes the specified channels from the submaster (sets their levels off).
[4] [+] [5] [SUB] [-] Sub button 1 (All Modes)
file:///C|/LIGHTP/HELP.ENG/page24.htm (14 of 25)11/2/2004 3:02:50 AM